Diamond TQ-400 Installations- und Betriebshandbuch - Seite 16

Blättern Sie online oder laden Sie pdf Installations- und Betriebshandbuch für Kommerzielle Lebensmittelausrüstung Diamond TQ-400 herunter. Diamond TQ-400 20 Seiten. Electric conveyor toasters

Seite drucken

POWER SAVE MODE WITH INDICATOR

LIGHT

All TQ-400, -800, -1200 and -1800 series toasters

have a built-in Power Save Mode with Indicator light

feature. This feature allows the toaster to go into

stand-by and reduces power to the heating

elements by 50%. During the Power Save Mode the

indicator light on the control panel will flash.

To activate press the POWER SAVE Mode button

until the indicator light flashes. See Figure 13.

NOTE: To place toaster back into full operation push

the Power Save button or turn any knob until the

indicator light stops flashing and stays on. Allow a

minimum of 2-3 minutes before toasting. Unit is

back up to full power within 10 minutes.

Warning

Top Heat Control

Light

Appliance is malfunctioning

when lit. Turn off power

and allow unit to cool.

See instruction manual

before operating.

Bottom Heat Control

COLORGUARD SYSTEM

All TQ-400, -800, -1200 and -1800 series toasters

use a patented ColorGuard Sensing System that

monitors and automatically adjust conveyor speed

during high usage periods to assure toast color

uniformity.

NOTE: The ColorGuard Sensing System is

inoperable for approximately ten minutes after any

heat adjustments are made.

If the Warning light on the control panel is lit,

appliance is malfunctioning. Turn OFF the power

to the unit and allow to cool. Once cool,

disconnect appliance from power supply and

have unit serviced by a qualified technician.

Color Control

Toaster is in Power Save mode

when flashing.

Push button and allow toaster

to heat up before toasting.

Power Save Mode

Figure 14. Control Panel – TQ-1800 Models

OPERATION

WARNING

On/Off Switch

Form No. TQ2M-1005