Diamond FVS-711/TS Handbuch - Seite 9

Blättern Sie online oder laden Sie pdf Handbuch für Backofen Diamond FVS-711/TS herunter. Diamond FVS-711/TS 12 Seiten.

2.9 REVERSAL OF DOOR OPENING

In this oven series you can reverse the door opening also after installation, without asking for this option upon

the order of the oven. Proceed as follows:

Unscrew and remove the 2 screws indicated by the ar-

rows, that fix the door to the hinges, taking care to

support the door.

Disconnect the wiring connector for the cooking

chamber lighting.

Pull the door out of hinges and lay it over a flat surface

with the handle upwards.

Remove the drip pan under the door from position A

and screw it again upside down on position B.

The holes for the fixing of position B are protected by

rivets, that must be removed.

Unscrew the 2 hinges from position A and B and screw

them again in the foreseen holes for position A1 and

B1.

Unscrew the door lock from position C and screw it

again on position C1. The holes of positions A1 B1 and

C1 are closed by protection screws. Use the screws

protecting holes A1 B1 and C1 to close the holes of

positions A, B, C.

After you have removed the right hand side panel,

pull out the wiring for chamber lighting and let it pass

through the hole near hinge B.

Connect the wiring connector for chamber light-

ing.

Fix the door upside down to hinges A and B.