Burndy 781810192504 Schnellstart-Handbuch - Seite 2
Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Crimpwerkzeug Burndy 781810192504 herunter. Burndy 781810192504 2 Seiten. Mechanical rotatable crimp tool
Seite drucken
FEATURES AND BENEFITS
FEATURES
-Comfort grip handles
-Heat treated steel jaws
-No tool adjustment required
-Approximately 9000 crimp cycle life
-Diewheel locking plate w/rotatable die wheel
-Multiple crimp selections on a rotatable die
wheel
-High strength fasteners
-Plated jaws
SPECIFICATIONS
Crimps YA, YA-L, YS, YS-L series connectors on #8 AWG through 4/0 AWG stranded copper conductor.
Connector/conductor combinations are UL Listed when installed in accordance with the installation chart.
INSTALLATION CHART
MRC840 TOOL INSTALLATION CHART
CONNECTOR (CU)
CONDUCTOR
HYLUG™
HYLINK™
(COPPER)
TERM
SPLICE
#8 AWG STR.
YA8C-
YS8C-
#6 AWG STR.
YA6C-
YS6C-
#5 AWG STR.
YA5C-
YS5C-
#4 AWG STR.
YA4C-
YS4C-
#2 AWG STR.
YA2C-
YS2C-
#1 AWG STR.
YA1C-
YS1C-
1/0 AWG STR.
YA25-
YS25-
2/0 AWG STR.
YA26-
YS26-
3/0 AWG STR.
YA27-
YS27-
4/0 AWG STR.
YA28-
YS28-
THE ABOVE CONNECTOR/CONDUCTOR COMBINATIONS ARE UL LISTED WHEN
INSTALLED WITH THIS TOOL.
OIL ALL PIVOTING POINTS EVERY THREE MONTHS
BENEFITS
Aids in prevention of hand slippage
Reduces jaw buckling and missalignment
under heavy loading
Provides reliable & consistent crimps
Lasts longer than imitations and will still be
working when others have worn out
Easily indexed to the desired crimp position
Ensures a quality crimp
No lost dies
Increases tool life by reducing tool wear
Provides enhanced corrosion protection
COLOR
DIE
NO. OF
2 CRIMPS
CODE
INDEX
CRIMPS
RED
49
1
2
BLUE
7
1
2
BLUE
7
1
2
GRAY
8
1
2
BROWN
10
1
2
GREEN
11
1
2
PINK
12
2
4
BLACK
13
2
4
ORANGE
14
2
4
PURPLE
15
2
4
OPERATION
The color coded rotatable crimp die wheel rotates to provide a proper match of the die wheel and
color coded connector. The die index is embossed onto the connector after the crimp is completed
for permanent inspection capability.
To index die wheel to desired crimp position:
A.
Open handles fully.
B.
Press die pin.
C.
Rotate die to the desired crimp groove.
D.
Release die pin. Be sure the locking plate is back in its home position.
CAUTION:
The locking plate must be in the home position. Cycling the tool with the locking
plate out from the home position may result in permanent damage to the die pin.
DIE PLATE
(HOME POSITION)
PREVENTIVE MAINTENANCE
The service life of a tool can be greatly improved with proper care and maintenance. To extend
the life of your BURNDY® MRC840 mechanical crimp tool keep it clean and well lubricated. Oil
all pivoting points every three months.
SERVICE
OTHER THAN THE MAINTENANCE TASKS DESCRIBED ABOVE, THESE TOOLS ARE NOT
USER SERVICEABLE. COMPLETE DISASSEMBLY OF THE TOOL IS NOT RECOMMENDED.
SHOULD SERVICE BE REQUIRED, RETURN THE TOOL TO THE BURNDY® TOOL SERVICE
CENTER OR A BURNDY® AUTHORIZED TOOL REPAIR CENTER. CALL 1-800-426-8720 FOR
ADDITIONAL INFORMATION.
For more information contact:
BURNDY®
150 BURNDY Road
Littleton, NH 03561
or call, toll free 1-800-426-8720
Additional or replacement manuals may be obtained free of charge from the BURNDY® Service Center.
DIE PIN
(REVERSE SIDE)