Aquasana EQ-600 Benutzerhandbuch - Seite 4

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Water Filtration Systems Aquasana EQ-600 herunter. Aquasana EQ-600 16 Seiten. Whole house water filter
Auch für Aquasana EQ-600: Installationshandbuch (5 seiten), Benutzerhandbuch (16 seiten)

Seite drucken

SYSTEM CONFIGURATION

If you have added components to your Rhino

(Installation shown below includes Professional Grade Install Kit)

10" Pre-Filter

(EQ-300 and

EQ-600 only)

20" Pre-Filter

(EQ-1000 and

Pro Kit only)

Salt-Free Water

Conditioner

(Optional)

Before installing

• Lay out system in appropriate configuration. Improper sequence

of equipment will affect performance, and could possibly damage

your system.

• For all installations: Anticipate the need for additional parts and pieces

including but not limited to pex tubing, clamps and mounting screws to

install unit properly (available at a local home improvement stores or

through your plumbing contractor). Due to the varieties of home design,

not all configurations can be addressed in this guide.

• DO NOT install this filter where the line pressure may exceed 100 psi.

The operating pressure range for this filter is between 20psi – 100psi.

• Install on cold water lines only (40° – 90°F).

• Installation of the filtration system must comply with existing state and

local plumbing codes. Aquasana and its manufacturer are not liable for

consequential or incidental damages due to improper installation.

• DO NOT install the unit on its side. It must be installed upright

to maximize contact with media bed.

note the correct sequencing below.

Water Filter System,

10" Post-Filter

(Optional)

Rhino

Water

Filter System

UV Filter

(Optional)