Panasonic AG-CX10 Handbuch - Seite 19

Blättern Sie online oder laden Sie pdf Handbuch für Camcorder Panasonic AG-CX10 herunter. Panasonic AG-CX10 21 Seiten.

Zoom + Focus

Please notice if a Zoom in/out adjustment have been initiated on a SKAARHOJ controller and one try to

zoom directly on the lens this will overrule Zooming from the SKAARHOJ controller.

If a Focus near/far adjustments have been initiated on a SKAARHOJ controller and one try to focus directly

on the lens this will overrule Focus adjustments from the SKAARHOJ controller.

This is a table of actions for some of the actions in the Panasonic CX350 Device Core (noted with EVA1

actions but principle is the same)

Zoom (Creep)

Zoom (Step)

Zoom (Fine)

Zoom (Binary)

Focus (Creep)

SKAARHOJ DEVICE CORES

Initiates a Creep Zoom in/out with speeds between -8 to +8

Binary triggers: Will only reﬂect the speed of the Creep Zoom value (-8

to +8)

Pulse inputs: Will cycle between -8 to +8. When -8 Creep Zoom out is at

the highest speed. When +8 Creep Zoom in is at the highest speed.

When 0 no zoom is initiated.

Displays: "Creep Zm/Speed of zoom"

Zoom in/out with steps deﬁned to a speciﬁc value. Used to quickly zoom

to a desired range

Binary triggers: Will only reﬂect the current zoom value in mm

Pulse inputs: Will zoom in/out with the given speed value

Speed Limit 1: Small steps

Speed Limit 8: Large steps

Displays: "Step Zm/Zoom range in mm"

Zoom in/out with small steps to a speciﬁc value zoom range

Binary triggers: Will only reﬂect the current zoom value in mm

Pulse inputs: Will zoom in/out in small steps to set a speciﬁc zoom

range. Only recommended to use for very small adjustments. Reacts

slow if turned multiple times

Displays: "Fine Zm/Zoom range in mm"

Used to zoom in/out via buttons instead of a encoder

Binary triggers: Zoom in/out as long as a button is pressed and held

down. Speed of the zoom is determined with the speed limiter.

Pulse inputs: Not implemented

Displays: "Zoom/[Out,In]"

Initiates a Creep Focus far/nearer with speeds between -6 to +6

Binary triggers: Will only reﬂect the speed of the Creep Focus value (-6

to +6)

Pulse inputs: Will cycle between -6 to +6. When -6 Creep Focus near is

at the highest speed. When +6 Creep Focus far is at the highest speed.

When 0 no zoom is initiated.

Displays: "Creep Fcs/Speed of focus"