Panasonic AG-DVC200P Betriebsanleitung - Seite 16
Blättern Sie online oder laden Sie pdf Betriebsanleitung für Camcorder Panasonic AG-DVC200P herunter. Panasonic AG-DVC200P 44 Seiten. Digital video camera recorder
Auch für Panasonic AG-DVC200P: Betriebsanleitung (45 seiten)
Seite druckenViewfinder displays
Viewfinder lamp displays
REC
BATT
2
3
The displays shown in the example are those of the AJ-VF10.
(For details on the viewfinder, refer to the operating instructions of
the viewfinder available as an optional accessory.)
1
REC (record) lamp
This lights up red during recording. It flashes when an error has
occurred. For further details, refer to "Warning system" (page
38).
2
(irregular operation status warning) lamp
This lights up when the unit is placed in an irregular operation
status for any of the items set to ON in the sub-menu <!LED>.
For details on selecting the items subject to the
display, refer to sub-menu <!LED> (page 37).
3
BATT (battery) lamp
This starts flashing several minutes before the battery voltage
drops to the level where the battery can no longer be used, and
it remains lighted when the battery can no longer be used. To
prevent an interruption to operation, replace the battery before
the battery becomes completely discharged. For further details,
refer to "Warning system" (page 38).
4
VTR SAVE (VTR power-saving) lamp
This lights up when the VTR SAVE/STBY switch is set to SAVE.
It goes off during recording.
<Note>
After the period set for the pause timer is exceeded during Rec
Pause, or after 1 minute has passed during Pause (Still), the
unit will automatically switch to SAVE mode and the lamp will
light, regardless of the VTR SAVE/STBY switch position.
1
VTR
SAVE
4
Viewfinder screen status displays
In addition to the images, messages indicating the unit's settings
and the operation mode appear on the viewfinder screen.
Also displayed are the center marker and safety zone markers.
At the top, bottom and right edges of the screen are the items which
have been set to ON using the sub-menu <MARKER/ZEBRA>, <VF
DISPLAY 1/2> and <VF DISPLAY 2/2> screens or the switches
relating to the viewfinder displays. When a setting has been
changed or an adjustment is made, a message informing the user
of the setting details, adjustment transition status and adjustment
result is displayed for about 3 seconds.
For further details, refer to the items concerned on the sub-menu
<MARKER/ZEBRA>, <VF DISPLAY 1/2>, <VF DISPLAY 2/2>,
<!LED>, <CAMERA ID> and <TIME DATE> screens.
1
EX
TAPE NEAR END FLUO.
2
iREC
TCG 12:34:56:00
3
4
¢1¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢
5
¢2¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢
7
6
SPOT
8
1100
LOW LIGHT
/
9
=========
48K
C H 1
C H 2
:
;
Status displays on the viewfinder screen when the
MODE CHECK switch is ON (normal)
lamp
EX
TAPE NEAR END FLUO.
TCG 12:34:56.00 NDF
SCENE
WHITE :A 3.6K
KNEE
:MANUAL
GAIN
:0dB
FILTER:1
SHUT
:OFF
=========
48K
C H 1
C H 2
Status displays on the viewfinder screen when the
MODE CHECK switch is ON (FULL AUTO)
EX
TAPE NEAR END
TCG 12:34:56.00 NDF
SCENE
FULL AUTO
FILTER:1
GAMMA :NORMAL
SKIN
=========
48K
C H 1
C H 2
16
<
AWB+02
QUICK FOCUS
DJ a n -01-01 23:59:00
¢¢¢ min 1 3 . 4V
G
H
F1:FLUO.
A.IRIS:BACK
GAMMA :NORMAL
COLOR :+10
SKIN
:OFF
!¢¢¢¢¢¢¢¢¢¢¢¢
DJ a n -01-01 23:59:00
¢¢¢ min 1 3 . 4V
FULL
F1:FLUO.
:OFF
!¢¢¢¢¢¢¢¢¢¢¢¢
DJ a n -01-01 23:59:00
¢¢¢ min 1 3 . 4V
I
=
>
?
Z78
@
32K
.
A
ATW
B
F56
.
C
0d B
D
FL1
E
F
J
J