Panasonic AG-DVC200P Betriebsanleitung - Seite 21

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Camcorder Panasonic AG-DVC200P herunter. Panasonic AG-DVC200P 44 Seiten. Digital video camera recorder
Auch für Panasonic AG-DVC200P: Betriebsanleitung (45 seiten)

Seite drucken

Electronic shutter settings

Shutter modes

Shutter modes and shutter speeds that can be set

Mode

Shutter speed

Standard

1/100, 1/120, 1/250,

1/500, 1/1000 and

1/2000 (sec.)

SYNCHRO

Within the 60.3 Hz to

SCAN

250.0 Hz range

SUPER V

<Notes>

≥Whatever mode is set for the electronic shutter, the faster the

shutter speed, the lower the camera's sensitivity.

≥In the automatic iris mode, the faster the shutter speed, the more

the iris opens and the shallower the depth of focus.

≥When SUPER V has been selected, the camera's sensitivity will

be halved.

Setting the shutter mode and speed

≥In the shutter speed and standard mode, the shutter speed is set

by selecting the SHUTTER switch position.

≥In the SYNCHRO SCAN mode, the shutter speed can be easily

changed by operating the JOG dial button.

Push the SHUTTER switch from ON to

SEL.

The current shutter setting appears in the area of the

viewfinder screen where messages notifying the user of

changes made to settings appear.

SHUTTER switch

JOG dial button

Applications

For shooting fast-moving subjects

clearly

For shooting monitor screens with

minimal striping in the horizontal

direction

For improving the vertical resolution

Press the SHUTTER switch to SEL again,

and repeat until the desired mode or

speed is displayed.

When all the modes and speeds are displayed, the display

changes in the following sequence.

1/100

1/120

SUPER V

mode

<Note>

The SUPER V mode is not selected as the factory setting. For this

reason, it is not displayed at the factory setting.

To select SUPER V mode, set the "SUPER V" of the sub-menu

<SW MODE> screen to ON. (See page 33)

Setting the synchro scanning mode

Push the SHUTTER switch from ON to SEL

and set to SYNCHRO SCAN.

The setting can be continuously selected within the 60.3 Hz to

250.0 Hz range by rotating the JOG dial button up or down.

<Note>

After the JOG dial button is rotated up or down while being pressed,

the setting will continue to change as long as the button is pressed

(even without the button being rotated).

Standard mode

1/250

1/500

1/1000

1/2000

SYNCHRO SCAN

mode