AquaScape AquaBasin 98134 Handbuch für Installation und Wartung - Seite 4

Blättern Sie online oder laden Sie pdf Handbuch für Installation und Wartung für Außen-Brunnen AquaScape AquaBasin 98134 herunter. AquaScape AquaBasin 98134 12 Seiten.

AquaScape AquaBasin 98134 Handbuch für Installation und Wartung
5) Now that everything is
in place, you can finish
covering the top of the
AquaBasin
(Fig. 10)
How to Hook Up a Decorative Spitter
1) The AquaBasin
grates for easy pump access. Connect the tubing to the
Ultra pump and ball valve using the clamps supplied from
the AquaBasin
or #98138 sold separately) and then place the pump and
plumbing inside the AquaBasin
can be run out the notch in the side of the AquaBasin
(Fig. 6 & 7)
2) The AquaBasin
recessed area. This gives you the option of running the
tubing to the most convenient location. If you are not using
the center hole, cover it up with a few 3"-4" stones so that
smaller gravel will not fall through.
3) Next, place the spitter on the AquaBasin
the tubing to the spitter with the supplied clamp from the
AquaBasin
#98138, or #98377 sold separately). (Fig. 11) The Aqua-
Basin
is designed with an 18" wide recessed area in the
middle. Depending on the decorative piece being used, this
recessed area will allow you to backfill with gravel around
the decorative piece giving it a more stable platform to sit
on. It is recommended that tall or oddly
shaped pieces be set in the middle and
backfilled with gravel to prevent the
piece from falling over.
4) If you do not have to backfill around the
decorative piece simply fill the recessed
area in with gravel in order to make the
fountain level with the top of the basin.
(Fig. 7)
5) Now that everything is in place, you can
now finish covering the top of the Aqua-
Basin
with gravel. (Fig. 12)
4
with gravel.
is designed with two removable
Ultra
Pump Kit (items #98136, #98137,
is designed with several holes in the
Ultra
Pump Kit (items #98136, #98137,
Fig. 9
. The cord from the pump
and connect
Fig. 13 The AquaBasin™ is designed with two supports
in the middle to help support heavier pieces.
.
Fig. 10
Fig. 11
Fig. 12