Panasonic AGDVC200 - DV CAMCORDER Betriebsanleitung - Seite 7
Blättern Sie online oder laden Sie pdf Betriebsanleitung für Camcorder Panasonic AGDVC200 - DV CAMCORDER herunter. Panasonic AGDVC200 - DV CAMCORDER 44 Seiten. Digital video camera recorder
Auch für Panasonic AGDVC200 - DV CAMCORDER: Betriebsanleitung (45 seiten), Spezifikationen (4 seiten)
Seite drucken
Parts and their functions
6
BREAKER switch
If an excessively high current flows inside the unit due to some
problem or other, the circuit breaker is tripped and the power is
automatically turned off to protect the unit.
Push this button in after conducting an inspection or repairs
inside the unit. If there are no problems, the power will come
back on.
7
MONITOR (volume) control
This is used to adjust the volume of the monitor speaker or
earphone.
8
AUDIO LEVEL CH1, CH2 (audio channel 1,
2 recording level) controls
These are used to adjust the CH1 and CH2 recording levels
while monitoring the level meter inside the viewfinder.
9
POWER/WARNING lamp
This lamp lights up green when the power is turned on, and it
flashes in green during interval recording. When a warning is
given, it lights up red or flashes in red to alert the user. For
further details, refer to "Warning system" (page 38).
:
SPEAKER
The sound can be monitored through this speaker.
When an earphone is connected to the PHONE jack, the sound
of the speaker will be automatically cut off.
What can be monitored is the mixed sound of CH1 and CH2.
;
SCENE FILE dial
This enables the camera settings that match the shooting
conditions to be selected. For further details, refer to "How to
use file select" (page 24).
<
MODE CHECK button
This enables the setting modes of the camera's control switches
to be checked in the viewfinder.
=
QUICK FOCUS button
This supports the focusing of the subject. When it is pressed,
the lens iris is opened for about 10 seconds. It makes the depth
of field shallower and facilitates focusing.
>
AUTO IRIS MODE selector switch
This is used to select the position that matches the shooting
conditions when shooting by automatically adjusting the lens
iris.
BACK.L : When making a back-lit subject brighter for shooting
STD
: For normal shooting
SPOT.L : For shooting a spot-lit subject
?
FULL AUTO button
This is pressed when there is no time to check the camera unit's
settings. The lens iris and white balance will be automatically
adjusted.
@
FULL AUTO lamp
This lights up when FULL AUTO shooting is being performed.
A
JOG dial button
This is used to select the menu items and perform settings when
the MENU button B is at the ON position. When the synchro
scanning mode has been selected for the shutter speed, the
shutter speed can be easily adjusted more finely.
B
MENU button
This is used to switch the menu ON and OFF.
C
RESET button
This is used to reset the numerical value of the counter or time
code.
<Note>
This value is reset immediately when the COUNTER has been
selected. When TC or UB has been selected, the reset button
works only when the TCG selector switch is at the SET position.
D
COUNTER selector switch
This is used to switch the counter display.
COUNTER: A relative numerical value is displayed by the
counter.
includes discontinuous parts, the counter reading
may also lack continuity.
TC
: The time code is displayed.
UB
: The user's bit is displayed.
E
TCG selector switch
This sets the time code operation mode to FREE RUN, REC
RUN or SET. For further details, refer to "Setting the time data"
(page 22).
F
AUDIO SELECT CH1, CH2 (audio channel 1,
2 auto/manual level adjustment selector)
switches
These are used to select the method used to adjust the audio
levels of audio channels 1 and 2.
AUTO : The audio level is adjusted automatically.
MAN : The audio level is adjusted manually.
G
AUDIO IN (audio input selector) switches
These are used to select the input signals to be recorded on
CH1 and CH2.
FRONT: The input signals from the microphone connected to
(MIC)
the MIC IN connector are recorded.
REAR : The input signals from the microphone connected to
(MIC)
the AUDIO IN CH1/CH2 connector are recorded.
REAR : The input signals from the line connected to the
(LINE)
AUDIO IN CH1/CH2 connector are recorded.
H
Mic power switches
These are used to turn the phantom power (+48V) for each rear
jack channel ON and OFF.
<Note>
ON or OFF can be set for supplying the phantom power of the
front microphone using "FRONT MIC POWER" on the
<MIC/AUDIO> sub-menu screen.
I
Backup battery compartment
For further details on replacing the backup battery, refer to
"Replacing the backup battery" (page 40).
7
However, when the tape recording