AquaScape AquaGarden Tabletop 78346 Installationsanweisungen und Wartung - Seite 3

Blättern Sie online oder laden Sie pdf Installationsanweisungen und Wartung für Außen-Brunnen AquaScape AquaGarden Tabletop 78346 herunter. AquaScape AquaGarden Tabletop 78346 12 Seiten. Fountain kit

AquaScape AquaGarden Tabletop 78346 Installationsanweisungen und Wartung

Contents

No. Description
1.
AquaGarden Tabletop Fountain Container
Plant and Waterfall Filter with Waterfall
2.
Light and Pump
3.
Plant Light
4.
Controller
5.
Transformer
6.
Expanded Clay Grow Media
7.
Black, Polished Decorative Gravel
8.
Mixed Decorative Gravel
Container
Pump
Dimensions
Wattage/GPH
11.5" x 5"
3W

Safety Information

WARNING: It is recommended to have all
electrical device plugged into a ground fault
circuit interrupter (GFCI) that has been installed
by a licensed electrician.
• Power cables should be protected at all times to avoid
punctures, cuts, bruises, and abrasion.

Instructions

• Rinse the container and filter with fresh water.
• Rinse clay media, decorative mixed gravel, and polished
black gravel individually.
• Place container in desired indoor location.
NOTE: Only set on a sturdy and flat surface.
• Install the plant and waterfall filter onto the container
(Ex. 1).
NOTE: The filter ships with a waterfall light and water
pump pre-attached for quick and easy setup, ensure
cords do not obstruct the filter from sitting flat (Ex. 2).
aquascapeinc.com |
CAN (866) 766-3426 |
4
AquaGarden Tabletop Fountain Kit Specs
Waterfall
Pump GPH
Light Watts
52 GPH/196 LPH
1.5W
US (866) 877-6637
1
5
8
6
Overhead Light
Controller Cable
Wattage
Length
3W
5.25 ft / 1.6 m
• Never handle power cords with wet hands.
IMPORTANT: Aquascape, Inc. is not
responsible for losses, injury, or death
resulting from a failure to observe these safety
precautions, misuse or abuse of pumps or
equipment.
2
7
Transformer
Transformer
Wattage
Cable Length
12W
11.75 in. / 29.8 cm
Ex. 1
3
Ex. 2
3