Panasonic AGDVC20P - 3 CCD DV CAMCORDER Betriebsanleitung - Seite 10

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Camcorder Panasonic AGDVC20P - 3 CCD DV CAMCORDER herunter. Panasonic AGDVC20P - 3 CCD DV CAMCORDER 42 Seiten. Agmini-dv camera/recorder
Auch für Panasonic AGDVC20P - 3 CCD DV CAMCORDER: Betriebsanleitung (40 seiten), Betriebsanleitung (42 seiten)

Seite drucken
Panasonic AGDVC20P - 3 CCD DV CAMCORDER Betriebsanleitung

Using the viewfinder

ª
Using the viewfinder
1
Pull out the viewfinder and turn it upward/downward by
pinching the viewfinder extension knob.
ª
Adjusting the field of view
1
Adjust the focus by sliding the eyepiece corrector knob.
≥You can adjust the brightness of the viewfinder from the
menu.
The range of view shown in the LCD or viewfinder is slightly
narrower than that outputted from the video output socket.
10
12:30:45PM
12:30:45PM
12:30:45PM
12:30:45PM
OCT 15 2005
OCT 15 2005
OCT 15 2005
OCT 15 2005
Before using

Power supply

ª
Charging the battery
When this product is purchased, the battery is not charged.
Charge the battery before using this product.
≥Battery charging time (
≥We recommend using Panasonic batteries.
≥If you use other batteries, we cannot guarantee the quality of
this product.
≥If the DC input lead is connected to the AC adapter, then the
battery will not get charged. Remove the DC input lead from
the AC adapter.
1
Connect the AC mains lead to the AC adapter and the AC
mains socket.
2
Put the battery on the battery mount by aligning the
mark, and then securely plug it in.
ª
Charging lamp
Lights up: Charging
Goes off:
Charging completed
Flashing:
The battery is over discharged (discharged
excessively). In a while, the lamp will light up and
normal charging will start.
When the battery temperature is excessively high
or low, the [CHARGE] lamp flashes and the
charging time will be longer than normal.
ª
Connecting to the AC outlet
DC IN 7.9V
1
Connect the AC mains lead to the AC adapter and the AC
mains socket.
2
Connect the DC Input Lead to the [DC IN] Socket on the
camera-recorder.
3
Connect the DC input lead to the AC adapter.
≥Do not use the power cord for other equipment since the
power cord is exclusively designed for the camera-
recorder. Or do not use the power cord of other equipment
for the camera-recorder.
CAUTION:
This unit will operate on 110/120/220/240V AC.
An AC plug adapter may be required for voltages other than
120V AC.
If a conversion plug is required, consult with your dealer as
to which one is to be purchased.
)
-11-