AquaScape AquaForce 2000 GPH Handbuch für Installation und Wartung - Seite 2

Blättern Sie online oder laden Sie pdf Handbuch für Installation und Wartung für Water Pump AquaScape AquaForce 2000 GPH herunter. AquaScape AquaForce 2000 GPH 16 Seiten. Solids handling pump

Seite drucken

AquaForce

Solids Handling Pump

Installation & Maintenance Instructions

Congratulations on your purchase of your new Aquascape™ Aqua-

Force™ Pump! You are the owner of one of the best magnetically

driven pumps on the market today. Because of its solids handling

capabilities, the Aquascape™ AquaForce™ Pump is designed spe-

cifically for your water garden. It is capable of transporting solids up

to 1/4" (7mm) from your pond to a waterfall, or preferably, a filtration

device such as the Aquascape™ UltraKlean™ Pressure Filter.

1) electrical Safety Aquascape™ AquaForce™ Pump

• Inspect your Aquascape™ AquaForce™ Pump upon arrival for any obvious signs of dam-

age. If damage is found, return the unit to where it was purchased for an exchange.

• Always unplug the Aquascape™ AquaForce™ Pump electrical supply before any routine

maintenance.

• Do not operate Aquascape™ AquaForce™ Pump with a damaged cord or plug

• Any pond related electrical equipment requires a GFI protected circuit. Always have a

qualified electrician install any electrical outlets. Test your GFI outlet on a regular basis.

• Do not use cord to pull plug from outlet. Grasp the plug and pull to disconnect.

• The Aquascape™ AquaForce™ Pump comes equipped with a 25' power cord. This should

be enough to reach an outlet close to your pond. Do not splice or remove the pump cord as

this will void any warranty.

• During winter, if you are not using the pump as a deicer, remove the pump from the pond

and place in a bucket of pond water in a frost-free location.

• The Aquascape™ AquaForce™ Pump has been designed to operate submersed in pond

water. DO NOT OPERATE DRY!

• KEEP THIS MANUAL—DO NOT THROW AWAY!

™