AquaScape Ultra 1500 Unterweisung und Wartung - Seite 5

Blättern Sie online oder laden Sie pdf Unterweisung und Wartung für Water Pump AquaScape Ultra 1500 herunter. AquaScape Ultra 1500 16 Seiten. Fountain and statuary pump
Auch für AquaScape Ultra 1500: Anleitung und Wartung (16 seiten), Handbuch für Installation und Wartung (7 seiten)

Seite drucken

• It is recommended that the pump NOT be positioned in

the deepest area of the pond. This will protect the fish

by preventing the pond from completely draining in the

case of a leak in the plumbing or filter. If needed, bricks or

stones can be used to raise the pump off the bottom of

the pond.

• The Ultra Water Pump includes an assortment of fittings

for a wide variety of plumbing options. Select and install

the appropriate fitting(s) for your application.

• The included Multi-Hose Adapter(s) is (are) designed to

accommodate different diameters of tubing and ideal for

applications using a single plumbing line.

• The Multi-Hose Adapter can

be threaded directly into the

discharge of the pump

(Ex. 3).

• If using a diameter of pipe

that is larger than the

smallest section of the Multi-

Hose Adapter, trim off the

smaller sections to prevent

flow restriction (Ex. 4).

• The included threaded

FPT 90° elbow allows the

water flow to be directed

horizontally, perfect for

fountain basin applications

where vertical space is

limited (Ex. 5).

• To install the elbow, attach

the included MPT Coupling

to the discharge of the

pump. Then thread the

collared elbow fitting to the

MPT Coupling to attach it to

the pump.

• The collared connections

allow the pump to be quickly

and easily disconnected

from the tubing for pump

removal or maintenance.

• The convenient included 1/2" Valve (400/550/800) (Ex. 6)

or 3/4" 3-Way Valve (1100/1500/2000) (Ex. 7) provide the

ability to customize flow rates.

Ex. 6

☎

aquascapeinc.com |

CAN (866) 766-3426 |

• The included flow control

valve can be installed directly

into the pump discharge or

installed horizontally using

the threaded FPT 90° elbow

(Ex. 8).

• Once installed, simply adjust

the valve(s) to dial in the

desired water flow.

• When using the 3-Way Valve, close off any unused valves

to maximize water flow to the valves in use.

• Attach the tubing to the

selected fitting(s) (Ex. 9)

using a twisting motion

(Ex. 10). If the tubing fits

loosely, a hose clamp (not

included) can be used to

secure the attachment.

• In some instances the tubing

may be difficult to attach to

Ex. 3

the selected fitting. If this is

the case, we recommend

heating the hose with a

hair dryer or simply dipping

the hose in very hot water

for a few seconds prior to

attachment. Lubrication

can also be used; we

recommend silicone grease

or olive oil.

Ex. 4

• Connect the other end of the pump tubing to the

decorative fountain or pond filter.

• Connect the pump to

an outlet (Ex. 11) that is

protected by a ground fault

circuit interrupter (GFCI).

Once the pump is running

and water is circulating,

check for leaks where the

Ex. 5

external connections are

made.

General Maintenance

• We recommend inspecting your pump on a regular basis

to make sure it is functioning properly. If water flow is

reduced, it may be due to

the filter screen or sponge

being clogged with debris.

• The front screen can be

removed by twisting the

locking knob counter-

clockwise and pulling the

Ex. 7

screen off (Ex. 12).

☎

US (866) 877-6637

Ex. 8

Ex. 9

Ex. 10

Ex. 11

Ex. 12