AquaScape AQUAFORCE 1000 Anleitung Handbuch - Seite 3
Blättern Sie online oder laden Sie pdf Anleitung Handbuch für Teichpumpen AquaScape AQUAFORCE 1000 herunter. AquaScape AQUAFORCE 1000 16 Seiten. Solids-handling pond pump
Auch für AquaScape AQUAFORCE 1000: Anweisungen und Wartungsanweisungen (16 seiten), Anleitung und Wartung (16 seiten)
Seite drucken
Contents
No.
Description
1.
AquaForce
Solids-Handling Pond Pump
®
2.
1", 1.25", 1.5" Multi Hose Adapter
3.
1.5" Rotational Ball Output
4.
1.5", 2" Multi Hose Adapter
5.
1.5" Female Fitting
Safety Information
WARNING: Risk of electric shock – This pump
has not been approved for use in swimming
pool or marine areas
WARNING: To provide continued protection
against risk of electric shock, connect to
properly grounded, ground fault circuit
interrupter (GFCI) outlets only, using the
following guidelines:
(A) Have a qualified electrician install a properly grounded
receptacle outlet, acceptable for outdoor use and
protected from snow and rain.
(B) Inspect cord before using.
(C) Do not use extension cords.
(D) Any wiring of pumps should be performed by a
qualified electrician to ensure code compliance and
user safety.
☎
aquascapeinc.com |
CAN (866) 766-3426 |
2
3
4
☎
US (866) 877-6637
5
(E) Unplug pump at receptacle outlet when not in use or
before removal from pond.
(F) To reduce risk of electrical shock, all wiring and
junction connections should be made per local codes.
Requirements may vary depending on usage and
location.
(G) The power cable should be protected at all times to
avoid punctures, cuts, bruises and abrasions.
(H) Never handle power cords with wet hands.
(I)
Do not remove cord and strain relief. Do not connect
conduit to pump.
(J) Do not use power cable
to lift pump.
1
3