AquaScape Signature Series 200 Anleitung und Wartung - Seite 6
Blättern Sie online oder laden Sie pdf Anleitung und Wartung für Schwimmbad-Filter AquaScape Signature Series 200 herunter. AquaScape Signature Series 200 16 Seiten. Pond skimmer
Auch für AquaScape Signature Series 200: Anleitung und Wartung (16 seiten), Installationsanweisungen und Wartung (16 seiten)
Seite drucken
threading one of the screws into
fi lter. Repeat this process for the
other screw. (See Ex. 10)
• Now remove the faceplate from
the skimmer, keeping the screws
installed through the faceplate
and liner. (See Ex. 11)
• Apply a bead of fi sh-safe silicone
sealant around the skimmer
opening, over the nut inserts.
Pre-installing the two screws in
the earlier steps will make it easy
to line up the skimmer faceplate
after the silicone is applied and
will keep the silicone in as thick
of a bead as possible.
(See Ex. 12)
• Replace the skimmer face plate
and the two corner screws and
then proceed with the bottom
two corners. Make sure the
holes in the faceplate that the
weir fl ap clicks into are on the
bottom. (See Ex. 13)
• With the 4 corners secured, you
may now punch the remaining
holes with your awl and thread in
all the screws. Again, be careful
not to damage the threads on
the nut inserts.
• Let dry for at least one hour before introducing water.
• Insert the Debris Net and optional Filter Brush Cartridge in
the skimmer. See image below for placement.
6
Ex. 10
Ex. 11
Ex. 12
Ex. 13
Signature Series™ 200 Pond
Skimmer
Optional Filter Brush
Cartridge secures brushes
making it easy to remove for
cleaning
Large volume debris net
Optional overfl ow helps
manage proper water level
US 1-866-877-6637 |
STEP 5
ADD ROCK AND GRAVEL
You can expect to use several tons of stone and gravel for
your water feature. Talk to your Aquascape retailer or rock
yard for help choosing the quantity and sizes of stone and
gravel. Visit www.aquascapeinc.com for information on
calculating the required stone and gravel. Below are some
helpful formulas for choosing the stone and gravel.
Stone Calculation for the Pond
Length x Width / 65 = Tons of boulders
Gravel Used in the Pond
Pond Gravel = 30% total tons of pond boulders
• Start from the bottom and set the largest character
boulders fi rst against the vertical walls, then stack the
smaller boulders on top.
• Be careful when placing any large boulders so you don't
damage the liner.
• The opening on the front of the skimmer can be hidden
by placing boulders on either side and bridging a stone or
piece of driftwood across, creating a cave effect.
Note: Make sure the boulders do not block the water fl ow into
the skimmer.
• Cover all remaining fl at surfaces with a couple inches of
decorative gravel. This will help lock the boulders in place,
as well as cover the remaining liner, protecting it from
ultraviolet rays, and giving bacteria a place to colonize.
CAN 1-866-766-3426 | www.aquascapeinc.com