AQUASOL AB-T-TDS Gebrauchsanweisung - Seite 6

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Messgeräte AQUASOL AB-T-TDS herunter. AQUASOL AB-T-TDS 6 Seiten. Table top meters

Seite drucken

P6 - Bluetooth App Code

(Useful only when Bluetooth App is

Purchased)

This setting will enter Bluetooth App Authorization Code in the machine for

Android Bluetooth App and Meter Paring.

a) In Setting Mode select "P6" and press "OK" to enter code.

b) Press "UP" or "DOWN" to enter values, Press "LEFT" or "RIGHT" to

shift between variables.

c) Press "OK" to Confirm and "ESC" and Exit settings.

P7 - Restore Factory Setting

This setting will restore Meter to Factory Default Values.

a) In Setting Mode select "P7" and press "OK" Machine will display

"8888"

b) Press "OK" to Confirm and "ESC" and Exit settings.

P8 - Manual Temperature Compensation

(Default Value = 25 Deg C)

This setting will enter the manual temperature compensation value,

applicable only if Temperature Electrode is not connected.

a) In Setting Mode select "P8" and press"OK" to enter value.

b) Press "UP" or "DOWN" to enter values, Press "LEFT" or "RIGHT" to

shift between variable.

c) Press "OK" to Confirm and "ESC" and Exit settings.

P9 - Bluetooth Operation Mode

This setting will select Bluetooth Operation Mode

APP Mode - Use Android App to connect Meter

Bluetooth Mode - Use to print Meter reading on Bluetooth Printer

a) In Setting Mode select "P9" and press "OK" to select APP or

Bluetooth.

b) Press "UP" or "DOWN" to select Mode and press "OK" to confirm.

c) Press "ESC" and Exit settings.

P10 - Electrode Coefficient

(K) Value setting

This setting will enter Conductivity Electrode (K=1.0) value as mentioned on

the electrode.

a) In Setting Mode select "P10" and press "OK" to select value.

b) Press "UP" or "DOWN" to select value and press "OK" to confirm.

c) Press "ESC" and Exit settings.

P11 – Electrode Coefficient (K) Range setting

This setting will select Conductivity Electrode (K=0.1/1.0/10) range as

mentioned on the electrode.

a) In Setting Mode select "P11" and press "OK" to select range.

b) Press "UP" or "DOWN" to select range and press"OK" to confirm.

c) Press "ESC" and Exit settings.

P12 - Standard Solution Selection

This setting will select Standard Solution range as mentioned on the

electrode.

a) In Setting Mode select "P12" and press "OK" to select range.

b) Press "UP" or "DOWN" to select range and press "OK" to confirm.

c) Press "ESC" and Exit settings.

P13 - Temperature Compensation Coefficien

(Default = 2.00 % /Deg C)

This setting will enter Temperature Compensation Coefficient for Automatic

Temperature Compensation.

a) In Setting Mode select "P13" and press "OK" to enter value.

b) Press "UP" or "DOWN" to enter values, Press "LEFT" or "RIGHT" to

shift between variable.

c) Press "OK" to Confirm and "ESC" and Exit settings.

P14 - Datum Temperature Setting

This setting will select Datum Temperature (18 / 20 / 25) range as mentioned

on the electrode.

a) In Setting Mode select "P11" and press "OK" to select range (18 / 20

/ 25).

b) Press "UP" or "DOWN" to select range and press "OK" to confirm.

c) Press "ESC" and Exit settings.

(USA/NIST/CHINA)