Panasonic WV-NF284 - i-Pro Network Camera Installationshandbuch - Seite 19

Blättern Sie online oder laden Sie pdf Installationshandbuch für Camcorder Panasonic WV-NF284 - i-Pro Network Camera herunter. Panasonic WV-NF284 - i-Pro Network Camera 36 Seiten. Ip video cameras
Auch für Panasonic WV-NF284 - i-Pro Network Camera: Spezifikationen (2 seiten), Broschüre (2 seiten), Referenz (2 seiten), Referenz (2 seiten), Vergleichstabelle (6 seiten), Spezifikationen (2 seiten), Spezifikationen (2 seiten), Hinweis zur Integration (8 seiten)

Seite drucken
Panasonic WV-NF284 - i-Pro Network Camera Installationshandbuch
The mounting requirements are shown as follows.
Mounting place
Model
Ceiling/wall
(Direct mounting)
Ceiling
WV-Q167
(Approx. 285 g)
* Make sure that the installed mount bracket can support more than 5 times of the weight of
the camera.
Step 7
Turn on the power of the camera.
Step 8
Adjust angular field of view and focus.
( pages 26 and 27)
Step 9
Attach the dome cover to the main body.
Insert the dome cover into the camera body
so that the "I" mark of the dome cover is
aligned with the "INSERT" position.
DOME COVER
Recommended
screw
M4 or equivalent
–
Dome cover lock
marker
D O
M E
IN S
C O
E R
V E
T
R
A D
J U
S T
L O
C K
DOME COVER
INSERT ADJUST LOCK
Number of
screws
4 pcs.
–
Step 10
Adjust images using a video monitor.
Rotate the dome cover clockwise until the
indication "❘" reaches the position "ADJUST".
Then, rotate the clear dome from side to side
while monitoring images on the video monitor
to find a place where images are displayed
without vignetting.
Inner dome
Clear dome
DOME COVER
Important:
When adjusting images by accessing the
inside the dome cover, make sure that
the indication "❘" is at the position
"ADJUST". Otherwise, it may damage the
camera and cause a malfunction.
Minimum pull-
out strength
of
a single screw
196 N {20 kgf}
*
Dome cover lock marker
D O
M E
IN S
C O
E R
V E
T
R
A D
J U
S T
L O
C K
DOME COVER
INSERT ADJUST LOCK
19