Panasonic WVNS954 - NETWORK CAMERA Installationshandbuch - Seite 15

Blättern Sie online oder laden Sie pdf Installationshandbuch für Camcorder Panasonic WVNS954 - NETWORK CAMERA herunter. Panasonic WVNS954 - NETWORK CAMERA 31 Seiten. Ip video cameras
Auch für Panasonic WVNS954 - NETWORK CAMERA: Spezifikationen (2 seiten), Betriebsanleitung (21 seiten), Broschüre (2 seiten), Referenz (2 seiten), Referenz (2 seiten), Hinweis zur Integration (8 seiten), Betriebsanleitung (21 seiten)

Seite drucken

Panasonic WVNS954 - NETWORK CAMERA Installationshandbuch

• It is recommended to use Panasonic's SD memory

cards (64 MB, 128 MB, 256 MB, 512 MB, 1 GB and

2 GB) since they have tested and confirmed full

compatibility with this product. If another SD mem-

ory card is used, this product may not work proper-

ly or performance deterioration may be caused.

Radio disturbance

When this product is used near a TV/radio antenna, or a

strong electric field or magnetic field (such as near a

motor or a transformer), images may be distorted and

noise may be caused.

Router

When connecting this product to the Internet, use a

broadband router with the port forwarding function

(NAT, IP masquerade).

Refer to the setup instructions (PDF) for how further

information about the port forwarding function.

How to Assemble the Cable with the Accessory

Connector

Strip back the cable jacket approx. 3 mm {0.1"} and

separate the individual conductors.

Approx.

3 mm {0.1"}

Insert

Contact

Prepare the individual conductors for clamping. Use

MOLEX band tool part number 57027-5000 (for UL-

Style Cable UL1015) or 57026-5000 (for UL-Style

UL1007) for clamping the contacts.

After clamping the contacts, push them into the proper

holes in the accessory connector of this camera until

they snap in place.

Cautions:

• Shrinking the cable-entry seal is a one-time proce-

dure. Do not shrink the cable-entry seal until ascer-

taining that the unit is functioning.

• CONNECT THIS TO 24 V AC CLASS 2 POWER

SUPPLY ONLY.

Wire

Insert the wire until A position

and clamp the contacts.

Wire

Contact