Panasonic CT-13R37 Benutzerhandbuch - Seite 3

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für TV Panasonic CT-13R37 herunter. Panasonic CT-13R37 4 Seiten. Crt tv

Seite drucken

LOCATION OF CONTROLS

1. EPJ (Earphone) Jack - Plug an earphone or monaural headphones with an 1/8 miniplug into

this jack for private listening.

2. Remote Sensor - Signals from the Remote Control unit are received here.

3. POWER - Press to turn the TV on or off.

4. VOLUME

- Press to raise or lower the level of the sound. And also, press to select the

desired setting during On-Screen operations.

5. CHANNEL

- Press to select a higher or lower numbered channel set into memory. And

also, press to select the desired setting during On-Screen operations.

6. AUDIO/VIDEO IN Jacks - Audio and video signal cables from an external source can be

connected here.

NOTE:

If needed customer can enter the OSD by pressing VOLUME

panel at the same time.

SETTING LANGUAGE

This TV can display the channel number, on screen displays and picture adjustments on the

screen in English, Spanish or French.

Press ACTION.

Press

to select the SET UP mode, then press ACTION.

NOTE:

All four arrows can be used to select the SET UP mode, not just .

Press

and then press

(e.g. English), then press ACTION.

Press ACTION to select the EXIT mode, then press

ACTION again.

NOTE:

If Spanish or French is chosen, the Closed Caption indicators will be in the selected language,

but the Closed Caption text will not be affected by the language selection.

TV OPERATION

To turn on the TV, press POWER.

The VOLUME can be adjusted to a desired level by pressing VOL (VOLUME)

The sound level will be indicated on the TV screen by GREEN BARS AND A NUMBER.

As the sound level increases, so do the number of BARS AND THE NUMBER on the

screen. The same is true for decreasing the level.

Set the TV/CATV menu option to the appropriate position. When shipped from the

factory, this menu option is in the CATV setting. See "To Memorize Channels".

TV - VHF/UHF channels

CABLE - CABLE TV channels

CH (CHANNEL)

and

Press and release the CH (CHANNEL)

next channel set into memory. Press and hold the button down to change channels more

quickly.

For proper operation, before selecting channels, they should be set into the TV's

memory. See "To Memorize Channels".

DIRECT CHANNEL SELECTION (0-9) - Press these buttons to select a channel.The

channel number will appear on the upper right corner of the TV screen. If an invalid

channel number is selected, the display will revert to the previous channel.

TV MODE DIRECT CHANNEL SELECTION - When the TV/CATV menu option is in the

TV position, all channels can be instantly selected by using two buttons (For example, to

select channel 2, press "0", then "2". If you press only "2", channel selection will be

delayed for a few seconds). For channels 10 and above, press the 2 digits in order.

CATV mode direct channel selection

When the TV/CATV menu option is in the CATV position, channels can be selected as

follows:

1-9

Press "0" twice, then 1-9 as needed.

Example, to select channel 2, press "002".

10-12

Press "0", then remaining 2 digits.

Example, to select channel 12, press "012".

13-99

Press the 2 digits in order.

Example, to select channel 36, press "36".

100-125

Press the 3 digits in order.

Example, to select channel 120, press "120".

NOTE: If the station being viewed stops broadcasting, the TV will automatically shut off

after 15 minutes.

EPJ

POWER

VOLUME

CHANNEL

ACTION

1 2

and

of the front

to select desired language

. The channel automatically stops at the

CLOSED CAPTION

WHAT IS CLOSED CAPTIONING?

This television has the capability to decode and display Closed Captioned television programs.

Closed Captioning will display text on the screen for hearing impaired viewers or it will

translate and display text in another language.

TO VIEW CLOSED CAPTIONS

VIDEO IN AUDIO IN

Press ACTION and press

then press ACTION.

Press

to select CC mode and then press , then press

to select desired Closed Caption (e.g. CAPTION CH1), then press

ACTION.

Press ACTION twice.

Captions: This Closed Caption Mode will display text on the screen in English or another

language (depending on the setting of the Closed Captions ). Generally, Closed Captions in

English are transmitted on Captions Channel 1 and Closed Captions in other languages are

transmitted on Captions Channel 2.

Text: The Text Closed Caption Mode will usually fill 1/2 of full screen with a programming

schedule or other information. After selecting a Closed Caption Mode, it will stay in effect until

it is changed, even if the channel is changed. If the Captions signal is lost due to a commercial

or a break in the signal, the Captions will reappear when the signal is received again. If the

channels are changed, the Captions will be delayed approximately 10 seconds.

For television programs broadcasting with Closed Captions, look in your TV guide for the

Closed Captions symbol (CC).

• When activating the Closed Captioned Decoder, there will be a short delay before the

Closed Captioned text appears on the screen.

• Closed Captioned text is only displayed in locations where it is available.

• If no caption signal is received, no captions will appear, but the television will remain in

the Caption Mode.

• Misspellings or unusual characters may occasionally appear during Closed Captioning.

This is normal with Closed Captioning, especially with live programs. This is because

during live programs, captions are also entered live. These transmissions do not allow

time for editing.

PICTURE

TIMER

• When Captions are being displayed, on-screen displays, such as volume and mute may

EXIT

not be seen or may interfere with Closed Captions.

LOCK

SET UP

• Some cable systems and copy protection systems may interfere with the Closed

Captioned signal.

• If using an indoor antenna or if TV reception is very poor, the Closed Caption Decoder

may not appear or may appear with strange characters or misspelled words. In this case,

adjust the antenna for better reception or use an outdoor antenna.

SETTING LOCK

LANGUAGE/IDIOMA/LANGUE

ENGLISH

This TV is fitted with a V-CHIP controller which provides you with channel viewing access controls

ESPAÑOL

FRANCAIS

and restrictions. This function allows adult screening of TV programs based upon ratings.

/ACTION

Press ACTION.

Press

to select the LOCK mode, then press ACTION.

Enter your password (4 digits) using Direct channel selection (0-9).

In the event of entering an incorrect password, press

the wrong password.

Enter the same password for confirmation only for the first time.

Press

press ACTION.

TV RATING

OFF

TV-Y

: all children

TV-Y7

: 7 years old and above

TV-G

: children's program

When you select TV-Y7, TV-PG, TV-14 or TV-MA, press RECALL to explain the rating.

Press

then press ACTION.

MOVIE RATING

OFF

: all ages

: parental guidance

PG-13

: parental guidance

for under 13 years old

Press ACTION twice.

NOTES:

• If you forget your password, turn on the TV. Reduce the volume to a minium level. Press and

hold VOLUME

simultaneously. Select the LOCK mode, then enter a new password.

• If you want to change the password, follow steps 1-3 and select the "CHANGE PASSWORD"

option then enter your new password.

• The V-Chip function is activated only on programs and tapes that have the rating signal.

• Once you block a program using the V-Chip function, the blocked program cannot be watched

based on the content of the show. When the program starts, the "ENTER PASSWORD" will

appear on the screen. When you want to release the V-Chip temporarily, enter the password.

If you change the channel or turn off the TV while the V-Chip function was temporarily

released, the original setting will be resumed. If you return to the channel you were watching

you must re-enter your password to temporarily release your V-Chip function again.

• If you are changing channels using a VCR or a cable box, while the TV remains on channel

3 or 4, the V-Chip operates differently. When you enter your password to temporarily

release the block on any channel, you have completely disabled the V-Chip function for all

stations. To reset the V-Chip turn your TV off and back on.

• Some cable boxes are built with a delay feature, in some cases it can take up to 10 seconds

for a program to appear after the password has been input.

to select the SET UP mode,

to select the V-CHIP option, then press .

to select the ON, then press ACTION.

to select the TV RATING or MOVIE RATING option, then press .

to select the desired rating for the applicable video or TV channel, then

TV–Y

TV-Y7

TV-G

TV-PG

TV-14

TV-MA

to select the desired rating you want. Press

PG-13

NC-17

on the front of the TV and press the 0 button on the remote control

or wait a few seconds to delete

TV-14

TV-MA

: parental guidance

: 14 years old and above

: 17 years old and above

to select the setting ON or OFF,

NC-17

: Parental guidance for under 17

years old

: 17 years old and above

: adult only