Panasonic CT-20SL14 - 20" CRT TV Handbuch - Seite 8

Blättern Sie online oder laden Sie pdf Handbuch für TV Panasonic CT-20SL14 - 20" CRT TV herunter. Panasonic CT-20SL14 - 20" CRT TV 28 Seiten.

Seite drucken
Panasonic CT-20SL14 - 20
OPTIONAL EQUIPMENT CONNECTIONS
Optional Equipment
Connections
Note:
The remote
control
must
be programmed
with supplied
codes
to operate
the optional
equipment.
VCR Connection
VCRs, video disc players,
video game equipment,
and
DSS equipment can also be connected to the video inputs.
See the optional equipment manual for more information.
Note:
VIDEO
1 input
is a dual-purpose
input.
It is primarily
intended
for connection
with 480i devices
such as a DVD
player
using
the Y PB PR component
video jacks
and
Audio
L & R jacks.
However,
it can also be connected
to
conventional
composite
video
sources
such as a VCR,
using
only the Y/Video
jack
and Audio
L & R jacks.
The
on-screen
label
will
display
Component
or
Video
1
depending
on which source
is connected.
E
TERMINALS
ON
BACK
OF
TELEVISION
INPUT 1
R-AUDIO-L
TO AUDIO
COMPONENT
AMP
VIDEO
INPUT
O
O
Use
either
the
S-Video
or
_
I
l
_
Video
Connection
CABL[S
N_,
_SIIIII_
Incoming
Jaekus
ed
FRONTA/VJACKS
headphone
pluo
Note:
Rear A/V jacks
diagram
may
vary, depending
on model.
Please
refer to the FEATURE
CHART
on page
3 for your
model's
capabilities.
Procedure
Connect
equipment
as shown
to front
or rear
Audio/
Video input jacks.
Select
the Video
mode
by pressing
TVNIDEO
button.
Operate
optional
equipment
as instructed
in equipment
manual.
Note:
Do not connect S-VIDEO and VIDEO signal to INPUT 2 at the
same time. If both are connected,
signal interference
wil! result.
Use either the S-VIDEO or the Video signal only (models CT-
20SL14, CT-24SL14, CT-27SC14 and CT-27SL14 only).
Front
Control
Panel
The front control panel can be used to access menus and
switch
video
mode
when
the
remote
control
is not
available.
Front panel for CT-32SL14/CT-36SL14
Front panel for CT-27SC14/CT-32SC14 (may vary depending on model)
Note:
The ON/OFF
indicator
LED
(red)
will light
up
(red)
when
the set is on.
Procedure
Connect
equipment
to front Audio/Video
input jacks.
Press TV/VIDEO
button
to select
desired
input mode.
Operate
optional
equipment
as instructed
in equipment
manual.
Note:
Front A/V jacks
diagram
may vary, depending
on model.
Please
refer to the FEATURE
CHART
on page
3 for your
model's
capabilities.
Cable Box Connection
Follow this diagram when connecting your television to a
Cable Box.
CABLE
BOX
TERMINALS
ON SACK
OF
TELEVISION
INPUT
1
R-AUDIO-L
COMPONENT
VIDEO
INPUT
_
[--
PR --
PB --YA/IDEO
©©©
S-VIDEO
@
0 R-ABO,_ ©
VIDEO
1coming
Cable
CABLES
NOT
INCLUDED
Procedure
Tune the television
to channel
3 or 4 depending
on the
RF out setting
of the cable box.
Using the cable
box, tune to the premium
cable channel
you want to view.
Digital
TV - Set-Top
Box (DTV-STB)
or DVD
Player
Connection
Use this diagram
to connect
the Panasonic
DTV-STB
(Digital TV-Set-Top Box) to the back of your -iV.
Note:
Rear A/V jacks
diagram
may
vary, depending
on model.
Please
refer to the FEATURE
CHART
on page
3 for your
model's
capabilities.
CABLES
NOT SUPPLIED
TERMINALS
ON BACK
OF
DTV=STB
OR DMD PLAYER
DIGITAL
TV OUTPUT
I
I
L
Y--PB--PR
COMPONENTVIDEO
INPUT
_ft
/
_
TERMINALS
ON BACK OF TV
INPUT
1
R-AUDIO-L
TO AUDIO
COMPONENT
AMP
VIDEO
INPUT
DEO
OeL
s-v Eo
Notes:
There
are
three
video
jacks,
Y,
PB,
and
PR.
Separate
component
color
inputs
provide
luminance
and color
separation.
Use
the L (left)
and R (right)
audio
inputs.
Select
DTV-STB
to 480i
output
mode.
TV set can
receive
480i signal only. Picture
distortion
will result
if any
other
type
of format
is selected
(i.e. 480p,
720p
or 1080i).
60