Panasonic CT-275F35 Betriebsanleitung - Seite 5

Blättern Sie online oder laden Sie pdf Betriebsanleitung für TV Panasonic CT-275F35 herunter. Panasonic CT-275F35 44 Seiten.

Seite drucken
INSTALLATION
Installation
Television Location
This unit is intended to be used with an optional stand or entertainment center.
Consult your
dealer for available options.
O
Avoid excessive sunlight or bright lights, including reflections.
Keep away from excessive heat or moisture,
Inadequate ventilation may cause internal
component failure.
O
Fluorescent lighting may reduce Remote Control transmitting range.
O
Keep away from magnetic equipment, including motors, fans, or external speakers.
Optional Cable Connections
Shielded audio and video cables should be used between components. For best results:
O
Use 75-ohm coaxial shielded cables.
O
Check type of output and input connectors on your components.
{
Determine required cable lengths.
AC Power Supply Cord
CAUTION:
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO
WIDE SLOT OF AC OUTLET AND FULLY INSERT. DO NOTUSE APLUG WITHA
ste
RECEPTACLE
OR OTHER
OUTLET
UNLESS
THE BLADE
CAN
BE FULLY
i
INSERTED TO PREVENT BLADE EXPOSURE.
FOR SOME MODELS THAT ARE
Polarized plug
NON-POLARIZED, THE USE OF AN AC ADAPTOR CONNECTOR MAY
BE NECESSARY.
Cable / Antenna 1 and 2
For proper reception, either a cable or antenna connection is required.
Cable Connection
Incoming Cable trom
Cable C
Connect the cable supplied by your local cable company.
a
Note:
A cable converter box may be required for proper reception.
(y
Check
with your local Cable
company
for compatibility
(0%) (CSEE
requirements.
75 Ohm VHF/UHF
Antenna 1 and 2 Connections
See
.
For proper reception of VHF/UHF channels, an externa! antenna is required. For
best reception an outdoor antenna is recommended.
.
Antenna 1 and Antenna 2 must be set to TV in the SET UP
Incoming Cable from
menu.
Home Antenna
@
Sow.
A
Cable Preset
Cable Mode is preset at the factory. Antenna
users
must
change
to Antenna
1 and
Antenna 2 in the Set Up Menu.