AquaSource 67354-1008D2 Schnellstart-Handbuch - Seite 5
Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Küche & Badarmaturen AquaSource 67354-1008D2 herunter. AquaSource 67354-1008D2 8 Seiten. Pull-down kitchen faucet
Seite drucken
ASSEMBLY INSTRUCTIONS
3.
3.
Remove quick connector (J) from the hose (B)
by unscrewing it counter clockwise.
hose (B) up through faucet (A), until the hose (B)
fitting is flush with the bottom of shank (C). Do
not pull fitting past the shank (C). Insert faucet (A)
through holes in top of sink. From underneath sink,
install rubber washer (F), metal washer (G) and
nut (H) onto the mounting shank (C).
Note: Do not feed the hose (B) back down through
the spout until step 4.
4. To install the hose (B), screw quick connector (J)
to the free end of hose (B). Align block (K) and
tab (L) on quick connector (J). Push quick
connector (J) housing firmly upward and snap onto
block (K). Pull down moderately to ensure connection
has been made.
If it is necessary to remove the hose,
press on the tabs (L) and pull quick connects (J) down.
After connecting the hose (B), attach weights (M) to
hose (B) at bottom of loop to prevent hose (B) from
twisting and return hose (B) to proper position.
5. Connect 1/2 in. IPS faucet
nuts (not included) with 3/8 in. O.D.ball-nose
risers (not included) to water supplies using
wrenches (not included).
Note: Refer to local plumbing codes for
permissible types of water supply connectors.
Retract
connector
or coupling
3
J
4
K
L
J
5
5
A
C
B
F
G
H
B
M