Panasonic CT-27L8 Betriebsanleitung - Seite 6
Blättern Sie online oder laden Sie pdf Betriebsanleitung für TV Panasonic CT-27L8 herunter. Panasonic CT-27L8 45 Seiten. Panasonic color television operating instructions
![Panasonic CT-27L8 Betriebsanleitung](/uploads/products/server2/3761640/3761640.png)
OP_ONAL
EQ_PMENT
CONNEC_ONS
Optional Equipment
Connections
Note:
The remote control must be programmed
with supplied
codes to operate the optional equipment (EUR7613Z10
only).
VCR Connection
VCRs,
video
disc
players,
video
game
equipment,
and
DSS equipment
can also be connected
to the video inputs.
See the optional
equipment
manual
for more information.
Note for models with Component video input:
VIDEO
1 input
is a dual-purpose
input.
It is
primarily intended for connection with 480i devices
such
as
a DVD
player
using
the
Y PB PR
component
video jacks
and Audio
L & R jacks.
However, it can also be connected to conventional
composite
video sources such as a VCR, using
only the Y/Video jack and Audio L & R jacks.
The
on-screen label will display Component or Video 1
depending on which source is connected.
CONt_ECTFONSOn BACK OF THE TV
/
_NPUTI
R
AUDIO
L
.......... ©
©
WDEO INPUTS
I_
p.
YNIDEC
©
© ©
INPUT 2
.......
@
©
©
R
aUDIO
•
VgEO
VIDEO OUT
,_U_lO OUT
N_T OUT
ANTIN
®
®
Note:
Rear A/V jacks diagram may vary, depending on model
Please refer to the FEATURE CHART on page 2 for your
model's capabilities.
Procedure
Connect equipment as shown to rear Audio/Video
input
jacks.
Select the Video mode by pressing TVNIDEO
button.
Operate optional equipment
as instructed in equipment
manual.
Front Control
Panel
The front control panel can be used to access menus and
switch
video
mode
when
the
remote
control
is
not
available.
Note:
Front A/V jacks diagram may va_ depending on model.
Please refer to the FEATURE CHART on page 2 for your
model capabilities.
A second VCR, Camcorder,
a video disc player, video
game equipment or DSS equipment can also be connected
to the vidoeo inputs. See the optional equipment manual.
Procedure
Connect equipment to front Audio/Video input jacks.
Select the Video mode by pressing TVNIDEO button.
Operate optional equipment as instructed in equipment
manual.
Cable
Box Connection
Follow this diagram when connecting
your television to a
Cable Box.
F
CONNECTIONS
ON BACK OF THE TV
r
INPUT I
R--AUDIO
--L
COMPONENT@@
VIDEO
INPUTS
I_pR--
P
--
YIVIDEO
©
© ©
INPUT 2
voEo ©
© ©
R__AUDIO
--L
V_DEO
CABLES
NOT SUPPLIED
Note:
Rear A/V jacks
diagram may va_
depending
on
model. Please refer to the FEATURE CHART on page
2 for your model's capabilities.
Procedure
Tune the television to channel 3 or 4 depending on the
RF out setting of the cable box.
Using the cable box, tune to the premium cable channel
you want to view.
Digital
TV - Set-Top
Box (DTV-STB)
or DVD
Player
Connection
(some
models)
Use
this
diagram
to connect
the
Panasonic
DTV-STB
(Digital W-Set-Top
Box) to the back of your TV.
Note:
Rear A/V jacks diagram may vary, depending on model.
Please refer to the FEATURE CHART on page 2 for
your model's capabilities.
Notes:
There
are three
video jacks,
Y, PB, and
PR.
Separate
component
color
inputs
provide
luminance
and color separation.
Use the L (left)
and R (right) audio inputs.
Select DTV-STB to 480i output mode. TV set can
receive 480i signal only.
4o