Diamond Audio Technologies VSP4BMW Benutzerhandbuch - Seite 4

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Auto-Lautsprecher Diamond Audio Technologies VSP4BMW herunter. Diamond Audio Technologies VSP4BMW 12 Seiten. Bmw specific 4" component speakers pair

Seite drucken

GENERAL SPEAKER INSTALLATION

General instructions for Diamond Audio BMW specific components. We ask that you read this

manual in its entirety to prevent damage to the speakers and possible damage to your BMW.

Read this manual carefully and follow all installation instructions. This product has been checked

for proper function prior to shipping and is guaranteed against manufacturing defects.For a proper

performance and to ensure full warranty coverage, we strongly recommend to get this product

installed by an authorized Diamond Audio dealer. This will also incrrease your warranty from 1

year to 2 years.

General instruction for installing Diamond Audio BMW specific speaker systems. The method of

installation chosen and level of execution will effect the overall performance of the speaker

system. Treat each installation step with a high degree of attention. We strongly recommend that

you do a "Pre-Check" of the wiring and speakers This will allow a trial listening test before

securing the loudspeakers into their mounting locations.

Install the speaj

ker wiring in a manner which precludes any danger of the leads being exposed to tearing or

crushing forces. If there are sharp edges in the vicinity (e.g. holes in the bodywork) all cables

should be put thru a "grommet" to protect and prevent fraying. Make sure that all speaker wires

easily reach the speaker terminals without stress on the wire or connectors. Once you have

tested the complete speaker the audio system off and prepare the loudspeaker for final instaltion

TWEETER INSTALLATION

For the installation of the tweeters you have to

re-move the mirror triangles that incorporated

the original tweeters. Remove the original

tweeters from the triangles and replace them

with the new Diamond Audio tweeters. If you

own a car that hasn't any tweeters installed ,

you have to buy the appropriate mirror triangles

as spare parts from your BMW dealer. After

the installation of the midwoofers and the

tweeters you have to connect them to the

crossover network using the included cable

harness. Please note that all wires from

speaker to crossover net-work are already

pre-assembled with cable shoes

Tweeter Crossover

(a division of CV & DA Holdings, Inc.)