Diamond Audio Technology D5 5.1 Benutzerhandbuch - Seite 11

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Auto-Verstärker Diamond Audio Technology D5 5.1 herunter. Diamond Audio Technology D5 5.1 17 Seiten. Professional reference series amplifier

Seite drucken

HIGHPASS ON/OFF

Pushing this button "IN" engages the Highpass filter. Pushing this button

"OUT" will bypass the filter. There is one of these switches for each of the

front, rear and center channels.

SLAVE SELECT

It is possible to completely run your D5 5.1 off of only one set or input RCA's.

The rear, center, and sub channels can all be slaved of the front channels

inputs. Simply push the appropriate button "IN" to slave that channel to those

inputs. You can also slave just the center and sub channels if you have a four

channel input.

SUBSONIC ON/OFF

Pushing this button "IN" engages the sub-sonic filter on the sub channels.

Pushing this button "OUT" will bypass the filter.

SUBSONIC FREQUENCY

Turning this control sets the sub-sonic filter point from 17 Hz (fully

counterclockwise) to 80 Hz (fully clockwise).

LOWPASS ON/OFF

Pushing this button "IN" engages the lowpass filter on the sub channels.

Pushing this button "OUT" will bypass the filter.

LOWPASS FREQUENCY

Turning this control sets the lowpass crossover point from 60 Hz (fully

counterclockwise) to 250 Hz (fully clockwise).

SUB CHANNEL INVERSION SELECT

Pushing this button "IN" inverts the phase of the sub channels by 180 degrees.

Pushing this button "OUT" keeps the sub channels in phase.

CROSSOVER FREQUENCY DIAGRAMS

Sub-sonic