3branch KURVE COLLECTION Montageanleitung - Seite 5
Blättern Sie online oder laden Sie pdf Montageanleitung für Inneneinrichtung 3branch KURVE COLLECTION herunter. 3branch KURVE COLLECTION 5 Seiten. Round computer table w/cylinder base & top dividers
Seite drucken
STEP 10
MOUNT TOP DIVIDER BRACKETS TO TOP PANEL WITH 5/16" X 1 1/4"
MACHINE SCREWS INSERTED UP THRU COUNTERSUNK HOLES IN
TOP PANEL.
*NOTE LEAVE DIVIDER BRACKETS SLIGHTLY LOOSE UNTIL DIVIDER
PANEL ARE INSERTED IN THE SLOTS IN THE BRACKETS.
*NOTE: TOP PANEL WILL NEED TO BE MOVED AROUND TO ACCESS
HOLES LOCATED @ CENTER OF TOP PANEL. TWO PEOPLE REQ'D
TO PREVENT TOP FALLING.
STEP 12
CENTER TOP PANEL ON BASE CYLINDER.
MOUNT TOP PANEL TO SUB-TOP WITH #10 X 1 1/2" FLAT HEAD PHILLIPS
SHEET METAL SCREWS.
KURVE COLLECTION
3branch
product design solutions
DIVIDER PANEL
MOUNTING
BRACKETS
5/16-18 X 1 1/4" FHP
MACHINE SCREWS
STEP 11
CENTER & INSERT LONG TOP DIVIDER PANEL INTO SLOTS IN BRACKETS.
INSERT SHORT TOP DIVIDER PANELS INTO SLOTS IN BRACKETS.
*NOTE: OFFSET SHORT DIVIDER PANELS 1/8" FROM FACE OF LONG DIVIDER
TIGHTEN SET SCREWS IN TOP DIVIDER BRACKETS TO SECURE DIVIDER
PANELS.
MOUNTING BRACKET MACHINE SCREWS.
#10 X 1 1/2" FHP
SCREWS
STEP 13
INSTALL GROMMETS IN HOLES LOCATED @ CENTER OF TOP.
LOCATE & LEVEL ASSEMBLED TABLE.
DESCRIPTION:
P 847.291.3900
F 847.291.3901
www.3branch.com
DATE:
07.08.21
PANEL.
AFTER ALL DIVIDER PANELS HAVE BEEN SECURED, TIGHTEN ALL DIVIDER
ADD SAND BAG TO BASE THRU ACCESS DOOR.
ROUND COMPUTER TABLE
W/CYLINDER BASE & TOP DIVIDERS
ASSEMBLY INSTRUCTIONS
DRAWING #
KU-CT-60-26-CYB-ATD-ASSEMBLY-01
TOP DIVIDER
PANELS
GROMMETS
REV #
0
SHEET
5 OF 5