AQUASYSTEM AMH1-25SUS Betriebshandbuch - Seite 7

Blättern Sie online oder laden Sie pdf Betriebshandbuch für Water Pump AQUASYSTEM AMH1-25SUS herunter. AQUASYSTEM AMH1-25SUS 12 Seiten. Air-motor type centrifugal pump

Seite drucken

How To Use

Before Operation starts

1. Be sure again if the pump, flange and other pipe connectors are not

loosened. Also, be sure if bolts and/or screws at each part of

motors/pumps are firmly fixed.

2. Supplying Air Pressure：0.4～0.6 MPa

3. Acceptable viscosity：Up to 2,000 cP

4. When the pump is disassembled due to inspection and/maintenance,

be sure if all parts are firmly fixed, every time when re-assembled.

5. Once again, we advise our valuable customers carefully to read our

Operation Manual (P. 1-4).

During Normal Operation

1. In case the pipes, hoses and valves etc. are connected,

be sure that they are firmly connected each other.

2. Ground wire

before

3. Air-plug should be gradually opened. Control the discharging volume

with air-valve angle.

※In case of "Under dry condition" or "Under non-use condition for

a long time", be sure, first of all, to fill the liquid (approx. 200 cc)

through the priming plug located at upper portion of pump.

4. Be sure that vibration and/or noise are stable.

Stop Operation

1. Close air-plug. (No discharging operation is allowed.)

2. The liquid can be taken out through the drain plug.

（If the liquid remains in a pump, it may generate the rust inside

of pump, which may cause mechanical troubles and/or damage

the performance.）

operating by all means.

Priming and Drain plug

Air Plug

Kits r