Panasonic AG-CK10P Betriebsanleitung - Seite 10

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Digitalkamera Panasonic AG-CK10P herunter. Panasonic AG-CK10P 24 Seiten. Color camera

Seite drucken

Troubleshooting

Starting up

Symptom

Power does not come on.

Unusual sound is heard.

During operating

Symptom

Video is distorted or not

recorded.

Recorded video is in black

and white.

Focusing does not work.

E-9

Confirmation Details

• Is the camera cable connected correctly?

Refer to the connections on page E-7.

• Some operating sounds may be evident when

powering on, switching IR modes and zooming.

Sounds in such cases do not necessarily

indicate a problem.

Confirmation Details

(Refer to the Operating Instructions of the Remote

Control Panel.)

• Are camera and video monitoring equipment

connected properly?

• Are both the video input connector selection

and the input selection made with the Remote

Control Panel the same?

• Are the video output settings correct for the

connected equipment? Connect a monitor to

the [VIDEO OUT] connector on the rear panel

of the Memory Card Video Recorder and check

the picture.

• The IR function was enabled, which results in a

B/W picture.

• Are you attempting to record video of scenes that

are hard to focus? In the following conditions,

focusing may be difficult.

examples are listed below:

• The field of view includes both distant and

near objects.

• The camera is shooting through dirty window glass.

• Ambient lighting is low.

• There are bright and reflective surfaces around

the object.

• The camera is shooting a rapidly moving object.

• The object has little contrast.

• A close-by object is being shot at high zoom ratio.

• The camera can also be focused manually. For

details, refer to the Operating Instructions of the

Remote Control Panel.