Panasonic AG-CK10P Betriebsanleitung - Seite 6
Blättern Sie online oder laden Sie pdf Betriebsanleitung für Digitalkamera Panasonic AG-CK10P herunter. Panasonic AG-CK10P 24 Seiten. Color camera
Seite drucken
Control reference guide
Front
REC lamp
You can set this to light or blink during
recording, or to stay unlit all the time.
For details on configuring settings,
refer to the Operating Instructions of
the Memory Card Video Recorder, or
contact your supplier.
Sunshade
Protects the lens from direct sunlight.
Wide conversion lens
The wide conversion lens enables a
wider viewing angle when recording
video.
Backlight compensation button
Controls the backlight compensation
function. (see page E-8)
Light button
Switches the camera operation button
illumination between lit and unlit.
(see page E-8)
Camera cable connector
Use the supplied camera cable to
connect the camera to the Memory
Card Video Recorder.
Zoom buttons
Control the zoom function. The [W]
button serves to zoom out and the
[T] button to zoom in.
AUTO ZOOM button
Pressing this button causes the
camera to automatically zoom in,
pause for a certain period, and
zoom out. (see page E-8)
E-5
Rear
REC button
Pressing this button causes the
Memory Card Video Recorder to
start recording. To stop an ongoing
recording, keep pressing the [REC]
button for about 2 seconds.
Camera mount holes
The supplied camera mount can be
attached here.
When the wide conversion lens is
mounted, use the front hole (A).
When the wide conversion lens is
removed, use the rear hole (B).
C o n t a c t y o u r s u p p l i e r w h e n
installing the camera.
Notes:
• Use only the wide conversion lens
that was mounted on the camera
when delivered.
• Use only the specified camera mount
positions to install the camera.
Top
A
B