Panasonic AU-VREC1 Firmware-Update-Verfahren - Seite 3

Blättern Sie online oder laden Sie pdf Firmware-Update-Verfahren für Digitalkamera Panasonic AU-VREC1 herunter. Panasonic AU-VREC1 5 Seiten.

[Perform update]

5. Insert the SD card into the SD card slot (NOT microP2 card slot) on the unit.

6. Disconnect the cable between the viewfinder and the camera body.

7. Press INFO button to display INFO screen. Press the operation button of VERSION and press the Jog Dial..

Access LED

8. When "UPDATE" menu item appears, press the

operation button of UPDATE > OK

9. Wait until the "Version update successful" dialog is

displayed. It may take

(Maximum).

10. Remove the SD card.

11. Switch OFF the power, and disconnect and connect

DC power > switch ON the power to complete.

12. Make sure the firmware version.

MENU:

SYSTEM SETTINGS >INFORMATION >VERSION

INFO button

SD card slot

approximately 60 minutes

Please refer to the next page

Firmware update procedure for Varicam series

VERSION operation button

Page3/5

January 2015

Jog Dial button

UPDATE

EXIT