Aquatec Equipment MAX AIR PA40 Gebrauchsanweisung - Seite 3

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Water Pump Aquatec Equipment MAX AIR PA40 herunter. Aquatec Equipment MAX AIR PA40 3 Seiten. Aeration pump

Seite drucken

CLEANING OR CHANGING

THE FILTER PAD

• Unscrew the top cover screw, and remove the top

cover.

• Take the filter pad out. Change it with a new filter

pad if necessary.

• Gently dust the filter pad then wash in mild,

soapy water and dry.

• Replace the filter pad and the top cover.

Secure with the top cover screw.

CHANGING THE DIAPHRAGM AND

DIAPHRAGM HOUSING

• Place the unit upside down, and unscrew the

four (4) screws that are securing the upper

housing to the lower housing.

• Return the unit to the upright position, and

remove the upper housing gently from the

lower housing.

Exploded View

Power Cable

Drive Unit

19mm Outlet Elbow

Bolt

• Unscrew the screws that are securing the

diaphragm housing to the coil frame. The

diaphragm housing can be removed after

disconnecting the Outlet Elbow.

• Carefully unscrew the Outlet Elbow located in the

center of the diaphragm. The screw is covered

with an anti-loosening adhesive.

• Replace it with a new diaphragm frame and a

new diaphragm housing, and ensure all screws

are tightly fastened.

Note: All models up to PA40/PA60 have two

(2) diaphragm blocks, and the other models

including and over PA40/PA60 have four (4)

diaphragm blocks. It is recommended to replace

all diaphragm blocks once a year.

Bolt

Air Filter Cover

Top Cover Gasket

Primary Air Filter

Heavy Duty Aluminium

Casing

Secondary Air Filter

Diaphragm Assembly

Hose Clip

Lower Housing