HP 11757B Handbuch - Seite 44
Blättern Sie online oder laden Sie pdf Handbuch für Schalter HP 11757B herunter. HP 11757B 44 Seiten. Multipath fading simulator
Auch für HP 11757B: Handbuch für Installation und Kalibrierung (42 seiten)
Seite drucken
HP 11757B
Measurement
Printing Results
Note
and use the arrow or data keys to set
4 NOTCH FREQ 5
the notch frequency you want to test at. Then press
and use the arrow or data keys to set
4 NOTCH DEPTH 5
the depth you want to test at.
You are now ready to make the actual measurement.
Press
. The Fader display will show the bit error
4 MEAS 5
rate approximately every 1 second.
You cannot print the data in this test. However, you can
print the parameters.
1. After the measurement has been completed, you
can print the parameters. First, set the printer
destination. Press
4 SHIFT 5 4 MEAS 5
use the
arrow key to select between
485
and
. Press
2 PRINT
destination. Use
485
and
. Press
INTERN
printout for the internal thermal printer.
Once the destination has been set, you do not need to
reset it before every printing. NONE is the PRESET
setting.
2. Next, print the parameters. Press
toggle the
key to get
485
the
key to display
485
The printer will print the parameters you used to
make the measurement.
Digital Radio Testing
(PRINTER), then
1 DEST
on
to set the
4 ENTER 5
1 DEST
to select between
EXTERN
on
to set the
4 ENTER 5
INTERN
4 SHIFT 5 4 MEAS 5
. Press
4 ENTER 5
2 PRINT
, the press
4 ENTER 5
PRVIEW
, then
. Use
.
1-41