HP 3100-16 v2 SI Konfigurationshandbuch - Seite 11

Blättern Sie online oder laden Sie pdf Konfigurationshandbuch für Schalter HP 3100-16 v2 SI herunter. HP 3100-16 v2 SI 15 Seiten. Hp 3100 v2 switch series

Seite drucken

Step

Configure an IPv6 static route.

NOTE:

If you specify a broadcast interface, such as a VLAN interface, as the output interface for a static route,

you must specify the next hop address.

Displaying and maintaining IPv6 static routes

Task

Display IPv6 static route

information.

Remove all IPv6 static routes.

To delete a single IPv6 static route, use the undo ipv6 route-static command. To delete all IPv6 static

routes, including the default route, use the delete ipv6 static-routes all command.

For more information about the display ipv6 routing-table protocol static [ inactive | verbose ] [ | { begin

| exclude | include } regular-expression ] command, see Layer 3—IP Routing Command Reference.

Command

ipv6 route-static ipv6-address prefix-length

{ interface-type interface-number

[ next-hop-address ] | next-hop-address }

[ preference preference-value ]

Command

display ipv6 routing-table protocol

static [ inactive | verbose ] [ |

{ begin | exclude | include }

regular-expression ]

delete ipv6 static-routes all

Remarks

Required

The default

preference of IPv6

static routes is 60.

Remarks

Available in any view

Available in system view