HP 316095-B21 - StorageWorks Edge Switch 2/24 Freigabemitteilung - Seite 16

Blättern Sie online oder laden Sie pdf Freigabemitteilung für Schalter HP 316095-B21 - StorageWorks Edge Switch 2/24 herunter. HP 316095-B21 - StorageWorks Edge Switch 2/24 19 Seiten. Edge switch release notes
Auch für HP 316095-B21 - StorageWorks Edge Switch 2/24: Handbuch aktualisieren (9 seiten), Handbuch (41 seiten), Handbuch (40 seiten), Freigabemitteilung (32 seiten), Freigabemitteilung (27 seiten), Handbuch (26 seiten), Freigabemitteilung (27 seiten), Freigabemitteilung (25 seiten), Installationsanleitung Handbuch (24 seiten), Freigabemitteilung (23 seiten), Freigabemitteilung (23 seiten), Freigabemitteilung (22 seiten), Freigabemitteilung (23 seiten), Freigabemitteilung (19 seiten), Freigabemitteilung (18 seiten), Anleitung Handbuch (17 seiten), Freigabemitteilung (17 seiten), Upgrade-Anweisungen (16 seiten), Anleitung Handbuch (16 seiten), Installationsanleitung Handbuch (16 seiten), Freigabemitteilung (16 seiten), Freigabemitteilung (17 seiten), Freigabemitteilung (17 seiten), Freigabemitteilung (11 seiten)

Known Issues

Port Diagnostics on All Ports is not Available When All Ports of an Edge

Switch are not Installed and Enabled

The Edge Switch 2/24 and Edge Switch 2/32 basic units have 8- and 16-ports

installed, respectively. The remaining ports can be enabled by purchasing

additional ports and licenses to enable them, in 8-port increments. If all of the

ports are not installed, Port Diagnostics must be run on one port at a time, and the

option to run diagnostics on all ports is not available.

Open Systems Management Server

Under the HAFM Product Manager > Hardware View menus, the Configure >

Management Server. . .menu option will result in a pop-up dialog. This dialog

states "This feature has not been installed. Please

contact your sales representative." This feature is not currently

available.

Auto-negotiate is supported. However, HP recommends that the port speed for

E_Ports (for Interswitch Links, or ISLs) be set to a specific port speed (1Gb/sec or

2Gb/sec, as appropriate for the speed of the directors or edge switches being

connected) instead of to Negotiate. Using a specific port speed decreases the time

for a fabric build in response to some perturbation event in the fabric. Similarly,

setting a specific port speed for N_Ports also decreases fabric build time.

However, setting a specific port speed for N_Ports is not required.

There are a few older HBA devices that do not always succeed in logging in to a

switch port when the port speed is set for auto-negotiate.

Workaround

If an older HBA is found to have difficulty logging into a switch port that has its

port speed configured as Negotiate, configure that port speed to 1Gb/sec or

2Gb/sec according to the operation speed of the HBA connected to that port.

HA-Fabric Manager Release Notes