HP 316095-B21 - StorageWorks Edge Switch 2/24 Freigabemitteilung - Seite 8

Blättern Sie online oder laden Sie pdf Freigabemitteilung für Schalter HP 316095-B21 - StorageWorks Edge Switch 2/24 herunter. HP 316095-B21 - StorageWorks Edge Switch 2/24 19 Seiten. Edge switch release notes
Auch für HP 316095-B21 - StorageWorks Edge Switch 2/24: Handbuch aktualisieren (9 seiten), Handbuch (41 seiten), Handbuch (40 seiten), Freigabemitteilung (32 seiten), Freigabemitteilung (27 seiten), Handbuch (26 seiten), Freigabemitteilung (27 seiten), Freigabemitteilung (25 seiten), Installationsanleitung Handbuch (24 seiten), Freigabemitteilung (23 seiten), Freigabemitteilung (23 seiten), Freigabemitteilung (22 seiten), Freigabemitteilung (23 seiten), Freigabemitteilung (19 seiten), Freigabemitteilung (18 seiten), Anleitung Handbuch (17 seiten), Freigabemitteilung (17 seiten), Upgrade-Anweisungen (16 seiten), Anleitung Handbuch (16 seiten), Installationsanleitung Handbuch (16 seiten), Freigabemitteilung (16 seiten), Freigabemitteilung (17 seiten), Freigabemitteilung (17 seiten), Freigabemitteilung (11 seiten)

Important Information

Upgrading to the latest Version of Firmware

Upgrading to firmware Version 05.01.00-24 is nondisruptive to attached devices.

The edge switch or director is not required to be offline before performing an

upgrade operation. Limitations to upgrades are clearly identified if there are any

limitations to performing the operation.

Before upgrading firmware, it is highly recommended that you back up the edge

switch or director configuration in the event that a failure should occur. Refer to

the switch or director Product Manager user guide for more information.

Embedded Web Server (EWS) also provides an option to print or save product

configuration to a file. Refer to the HP StorageWorks Embedded Web Server User

Guide for more information.

Before upgrading the Director 2/64 or Director 2/140 to Version 05.01.00-24,

execute a CTP switchover to assure that the backup CTP card is fully functional.

To execute a CTP switchover, perform the following steps:

1. From Product Manager Hardware view, verify that an amber LED indicator

2. Right-click on a CTP card and choose Switchover from the menu.

3. Upgrade firmware to Version 05.01.00-24.

All products must be running firmware Version 04.00.00 or higher before

upgrading to Version 05.01.00-24. If a switch or director is operating with a

firmware level below 04.00.00, you must upgrade to Version 04.00.00 or higher

before installing Version 05.01.00-24.

All products must be running Version 02.00.00 or higher before upgrading to

Version 04.01.02-04. Upgrading to Version 04.01.02-04 from Version 02.00.00 or

higher is nondisruptive to attached devices.

Firmware that predates the 01.03.00 or 01.04.00 firmware release must first be

upgraded to a 01.03.xx or 01.04.xx firmware version, and then upgraded to

Version 02.00.00 or higher, before the upgrade to Version 04.01.02-04 can be

completed.

does not display for either CTP card.

Note:

The switch or director will lose its Ethernet connection for a short period

during the switchover process.

HA-Fabric Manager Release Notes