HP ProCurve 5300xl Ergänzendes Handbuch - Seite 19
Blättern Sie online oder laden Sie pdf Ergänzendes Handbuch für Schalter HP ProCurve 5300xl herunter. HP ProCurve 5300xl 38 Seiten. Access controller xl module to the hp procurve 6400cl/5300xl/3400cl
Auch für HP ProCurve 5300xl: Spezifikationsblatt (12 seiten)
Seite druckenHPswitch (config)# access-controller <slot-id>
where <slot-id> is the slot in the 5300xl where the ACM is installed.
HPswitch (access-controller-id)# ip address <<ip-addr>/<1-32> |<ip-addr> <mask>>
where <ip-addr>/<1...32> is the selected address in CIDR notation (/mask
bit number), for example 10.1.2.3/24.
<ip-addr> <mask> provides the selected address and the mask.
If necessary, use the following command to set or change the default gateway:
HPswitch (access-controller-id)# ip default-gateway <ip-addr>
where <ip-addr> is the numeric IP address of the default gateway, for
example 10.1.2.3.
Use the IP address of the 740wl/760wl and its shared secret to establish
communications with the ACM.
HPswitch (access-controller-id)# access-control-server ip <ip-addr> secret
<secret> <secret>
where <ip-addr> is the address of the 740wl/760wl
<secret> is the shared secret configured on the 740wl/760wl.
In the following example, an ACM establishes communications with an access
control server with IP address 13.13.13.8. The access control server has a
shared secret of 7734Oh. The show status command is used to confirm that
communications has been established, indicated by a time value displayed
(2 secs) in the Connected: field.
Configuring the ACM on the Network
15