HP ProLiant DL380 G4 DPSS Anmerkungen zur Veröffentlichung - Seite 4

Blättern Sie online oder laden Sie pdf Anmerkungen zur Veröffentlichung für Schalter HP ProLiant DL380 G4 DPSS herunter. HP ProLiant DL380 G4 DPSS 8 Seiten. Generation 4 (g4) packaged cluster with modular smart array 1000
Auch für HP ProLiant DL380 G4 DPSS: Handbuch zur Umsetzung (35 seiten), Anmerkungen zur Veröffentlichung (21 seiten), Einbauanleitung (2 seiten), Weißbuch (13 seiten), Handbuch zur Umsetzung (9 seiten), Hinweise zur Integration (26 seiten), Quickspecs (48 seiten), Quickspecs (42 seiten), Installationshandbuch (48 seiten)

Seite drucken
HP ProLiant DL380 G4 DPSS Anmerkungen zur Veröffentlichung
Microsoft® Windows® Unified Data Storage Server 2003
Languages
When the Microsoft Multilingual User Interface (MUI) is installed on the HP ProLiant Storage Server,
the following languages are available:
•
French
•
Italian
•
German
•
Japanese
•
Korean
•
Simplified Chinese
•
Spanish
•
Traditional Chinese

Issues and workarounds

Issues and their workarounds have been identified and placed into categories. These categories are:
• Microsoft Windows Server 2003
• HP Storage Server Management console user
•
Configuration, page 6
• Additional applications and
• System installation and recovery
Microsoft Windows Storage Server 2003 R2
This section describes issues related to Microsoft Windows Storage Server 2003 R2.
Issue:
Bugcheck 0x50 (PAGE_FAULT_IN_NONPAGED_AREA) in next boot after disabling Multipath
Support
Description
Workaround Bring up the Safe Mode menu using F8 during the reboot sequence. Select Last
HP Storage Server Management console user interface
This section describes issues with the user interface for the HP Storage Server Management console.
Issue:
HP Storage Server Management console stops responding after cancelling
4
R2, page 4
utilities, page 6
process, page 7
Microsoft Windows Storage Server 2003 R2
Using the Microsoft Device Manager to disable the HP MPIO driver and rebooting
the system causes the system to continuously reboot. After successfully installing
the MPIO and DSM for MSA/EVA/XP, right-click and disable Multipath Support
from Device Manager and reboot the system. During the next boot, the system
bugchecks with bugcheck code 0x50 when coming up. The issue occurs because
the DSM uses MPIO export DsmGetVersion. This call is made even before the DSM
registers with MPIO. Since MPIO is disabled, DsmGetVersion is not available,
and the system bugchecks. The uninstall driver selection under Device Manager
works fine.
Known Good Configuration to recover the system, or boot into the recovery console
and disable the DSM service.
HP Storage Server Management console user interface
interface, page 4
Install SIS