HP PS1810-8G Handbuch zur Schnelleinrichtung - Seite 2

Blättern Sie online oder laden Sie pdf Handbuch zur Schnelleinrichtung für Schalter HP PS1810-8G herunter. HP PS1810-8G 8 Seiten.

Wall Mounting: Install two 5/8-inch (15.875 mm) Number

12 wood screws, (included) into the mounting surface,

positioned 6.3 inches (160 mm) apart. Use the wall anchors

if necessary. Then, position the switch over the screws and

slide to lock in place.

Important: For wall-mounting, the network ports must be

facing up or down. (See "Installation Precautions" on

page 6.)

Under-Surface Mounting: Install the two screws on the

surface bottom similarly to the procedures for wall

mounting. Then, position the switch over the screws and

slide to lock in place. Install the third screw at the side of

the switch to prevent it from sliding out of the locked

position, if necessary.