HP StorageWorks 2/8q FC Schnellstart

Blättern Sie online oder laden Sie pdf Schnellstart für Schalter HP StorageWorks 2/8q FC herunter. HP StorageWorks 2/8q FC 2 Seiten. Fibre channel switch

Seite drucken
HP StorageWorks
2/8q Fibre Channel
Switch

Quick Start

For additional instructions, refer to the
2/8q FC Switch Installation Guide and
the MSA1000 Small Business SAN Kit
Installation poster.
Copyright 2004 Hewlett-Packard Development Company, L.P.
©
Hewlett-Packard Company makes no warranty of any kind with regard to
this material, including, but not limited to, the implied warranties of
merchantability and fitness for a particular purpose. Hewlett-Packard shall
not be liable for errors contained herein or for incidental or consequential
damages in connection with the furnishing, performance, or use of this
material.
This document contains proprietary information, which is protected by
copyright. No part of this document may be photocopied, reproduced,
or translated into another language without the prior written consent of
Hewlett-Packard. The information contained in this document is subject to
change without notice.
Product names mentioned herein may be trademarks of their respective
companies as reflected by an associated footnote.
Hewlett-Packard Company shall not be liable for technical or editorial
errors or omissions contained herein. The information is provided "as is"
without warranty of any kind and is subject to change without notice. The
warranties for Hewlett-Packard Company products are set forth in the
express limited warranty statements for such products. Nothing herein
should be construed as constituting an additional warranty.
Printed in the U.S.A.
HP StorageWorks 2/8q FC Switch Quick Start
Installation Instructions
First Edition (November 2004)
Part Number: A7450-96001
Installation
Instructions
A7 4 5 0 - 9 6 0 0 1
Step 1: Verify package contents
1
3
4
1
2/8q FC Switch
2
Quick Start Installation Instructions
(this document)
3
Power cable
(approved for use in the United States)
4
Mounting adapter brackets and screws
5
Rubber feet
6
Small Form Factor Pluggable (SFP) transceivers
Note:
Additional power cables approved for use in countries other
than the United States may be included in the shipping carton. Use
the cable appropriate for your installation.
Step 2: Identify switch features
1
Power receptacle
2
Serial port
3
Ethernet port
4
Chassis LEDs
(Input Power, Heartbeat, and System Fault)
5
Fibre Channel port LEDs
(Port Logged-In and Activity)
6
Fibre Channel port 0
Note:
Do not connect power to the switch until instructed in step 5.
2
6
5
1
2
3
4
5
6