HP StorageWorks 3.0.x Kurzreferenz-Handbuch - Seite 5
Blättern Sie online oder laden Sie pdf Kurzreferenz-Handbuch für Schalter HP StorageWorks 3.0.x herunter. HP StorageWorks 3.0.x 5 Seiten. Fabric os commands
Seite druckensfpShow
Display serial ID SFP information.
slotOff
Disable a blade slot.
slotOn
Enable a blade slot.
slotpoweroff
Power off a blade unit.
slotpoweron
Power on a blade unit.
slotShow
Display slot status.
snmpMibCapSet
View and modify options for
configuring SNMP MIB trap
capability.
spinFab
Test for Cascaded switch ISL links.
spinSilk
Functional test of internal and
external transmit and receive paths at
full speed.
sramRetentionTest
Data retention test of the
miscellaneous SRAMs in ASIC.
statsTest
Run a statistics counter diagnostic test.
supportShow
Print switch information for
debugging purposes.
switchBeacon
Set switch beaconing mode on or off.
switchCfgSpeed
Configure all ports of the switch to a
particular speed level.
switchCfgTrunk
Enable or disable trunking on all the
ports of a switch.
switchDisable
Disable the switch.
switchEnable
Enable the switch.
switchName
Display or set switch name.
switchReboot
Halt and bring down the operational
switch.
switchShow
Display switch and port status.
switchShutdown
Halt the operational switch.
switchStart
Initialize the switch to operational.
switchStatusPolicySet
Set the policy parameters that
determine the overall switch status.
switchStatusPolicyShow
Display the policy parameters that
determine the overall switch status.
switchStatusShow
Display the overall status of the
switch.
switchuptime
Display the amount of time the switch
has been operating.
syslogdIpAdd
Add the IP address of a syslog
daemon.
syslogdIpRemove
Remove the IP address of a syslog
daemon.
syslogdIpShow
Display all syslog daemon IP
addresses.
systemtest
Run diagnostics on a switch blade.
tempShow
Display temperature readings.
topologyShow
Display the unicast fabric topology.
trackChangesSet
Enable configuring of track-changes
feature.
Legend:
V3.0.x unique commands
V4.0.x unique commands
V3.0.x and V4.0.x commands
trackChangesShow
trunkDebug
trunkShow
turboRamTest
uptime
uRouteConfig
uRouteRemove
uRouteShow
version
wwn
zoneAdd
zoneCreate
zoneDelete
zoneHelp
zoneRemove
zoneShow
Legend:
V3.0.x unique commands
V4.0.x unique commands
V3.0.x and V4.0.x commands
Page 5
Display status of track-changes
feature.
Debug a trunk link failure.
Display trunking information.
Turbo SRAM logic test for 2-Gb
ASICs.
Display length of time the system has
been operational.
Configure a static route.
Remove a static route.
Display unicast routing information.
Display firmware version information.
View a switch WWN.
Add a member to the zone.
Create a zone.
Delete a zone.
Display help information on zone
commands.
Remove a member from a zone.
Display zone information.