HP StorageWorks 8/24 - SAN Switch Freigabemitteilung - Seite 18

Blättern Sie online oder laden Sie pdf Freigabemitteilung für Schalter HP StorageWorks 8/24 - SAN Switch herunter. HP StorageWorks 8/24 - SAN Switch 30 Seiten. Hp storageworks fabric os 6.1.2b release notes (5697-0351, march 2010)
Auch für HP StorageWorks 8/24 - SAN Switch: Spezifikationen (20 seiten), Freigabemitteilung (29 seiten), Freigabemitteilung (32 seiten)

Seite drucken

HP StorageWorks 8/24 - SAN Switch Freigabemitteilung

Fabric OS 6.1.0 fixes

Table 6

lists defects closed in the Fabric OS 6.1.0 firmware release.

Table 6 Fabric OS 6.1.0 closed defects

Closed defect summary

Autonegotiation with specific HBAs does not bring the ports to the

correct maximum speed.

An FC Analyzer trace shows an FCR port is receiving periodic RRQ

and ABTS frames.

HAReboot on MP Router 400 (with the edge fabric is an EOS fabric)

results in port bouncing due to no BB credits.

After switchdisable and switchenable all FCR switches, from

the edge fabric translate domain are missing.

Unable to access CUP Port on local or cascaded switch through DC

Director.

In some rare scenarios, application hangs are noticed on the Server

when FCFW related actions are taken on the fabric.

Management server daemon (msd) panic on switch during fabric bring

up.

In a FICON configuration, VE port persists in offline state after link

down when GbE link is routed through a network switch

Unable to establish connectivity between HBA and Storage.

CP failover on a 4/256 SAN Director.

FCFW devices: I/O fails on the backbone fabric.

LD ISL sometimes comes up in VC_RDY mode, not QoS mode.

During constant power-cycle test, one of the switches panicked due to

a memory allocation failure.

Request change to parameters passed to Java running on the PC.

When ports are segmented, two B-model fabrics are shown connected

to each other even though safe zoning state differs.

Subnetted FCIP port sends MAC level broadcast instead of the routers

MAC.

In some cases, frame loss is observed during normal FICON I/O.

TopTalkers counters are inaccurate when enabled on more than one

Fx_Port at a time.

Top Talker F_Port monitor is broken, only one F_Port can be monitored

at one switch. Same test case passed on Beta frame.

FICON Emulation Error running to STK/SUN tape drives.

Solution

Fixed in Fabric OS 6.1.0