HP StorageWorks 8/8 - SAN Switch Freigabemitteilung - Seite 4
Blättern Sie online oder laden Sie pdf Freigabemitteilung für Schalter HP StorageWorks 8/8 - SAN Switch herunter. HP StorageWorks 8/8 - SAN Switch 43 Seiten. Hp storageworks fabric os 6.1.2b release notes (5697-0351, march 2010)
Auch für HP StorageWorks 8/8 - SAN Switch: Freigabemitteilung (30 seiten), Freigabemitteilung (29 seiten), Freigabemitteilung (32 seiten)
Seite drucken
Use FSPF cost in FCR backbone fabric to find shortest path to edge fabric
In-band management link over FCIP connections for HP StorageWorks 400 Multi-protocol
Router
TCP byte streaming for FCIP connections with WAN optimization hardware
Improved FCIP statistics support, including TCP connection history, high watermark information,
and connection snapshot capability
Support temporary licenses for Adaptive Networking, Integrated Routing, and Fabric Watch
Security enhancements
IPv6 auto-configuration
IPSec with IPv6 (for management port)
Configurable switch-wide policy requiring authentication of all HBAs
RADIUS enhancements allowing password expiration and source IP address information
LPAD enhancement allowing for alternate domain UPN
IPv6 certified for JITC Approved Product List
FICON enhancements
RNID support for CUP
New FC addressing modes for support with virtual fabrics
Support for HP StorageWorks SAN Director 48 Port 8Gb FC Blade with VF-enabled HP Stor-
ageWorks DC SAN Backbone Director and DC04 SAN Director for FICON environments
Access Gateway enhancements
AG mode support on HP StorageWorks 8/40 SAN Switch.
Miscellaneous
FC ping support between switches (ping switch WWN)
Provision of path information via CLI
Frame redirection support in interopmode 3 (McDATA Open Fabric Mode)
Support for M-EOSn's 239 Domain ID mode via FCR in interopmode 3
System-wide RASLOG
Port auto-disable support
Ethernet port bonding for management ports
New CLI command to configure F_Port receive buffer credits
New feature descriptions
This section describes the new features that were introduced in Fabric OS 6.2.0a.
Virtual fabrics
Virtual Fabrics (VF) is a new capability supported on the HP StorageWorks DC SAN Backbone
Director, DC04 SAN Director, HP StorageWorks 8/80 SAN Switch, and HP StorageWorks 8/40
SAN Switch. Once enabled, VF allows the user to divide a single physical chassis or switch into
multiple logical switches by assigning individual ports to a logical switch. Each of these logical
switches is managed as a completely independent layer 2 Fibre Channel switch, and can be de-
ployed in independent fabrics known as logical fabrics.
VF also allows the user to create a special logical switch known as the base switch, used for
connectivity to other base switches and also as a backbone fabric for Fibre Channel Routing. In-
dividual logical fabrics may utilize this shared base fabric for connectivity to other switches,
4