HP StorageWorks 8/80 - SAN Switch Freigabemitteilung - Seite 7
Blättern Sie online oder laden Sie pdf Freigabemitteilung für Schalter HP StorageWorks 8/80 - SAN Switch herunter. HP StorageWorks 8/80 - SAN Switch 29 Seiten. Hp storageworks fabric os 6.1.2b release notes (5697-0351, march 2010)
Auch für HP StorageWorks 8/80 - SAN Switch: Freigabemitteilung (30 seiten), Freigabemitteilung (43 seiten), Freigabemitteilung (32 seiten)
Seite drucken
IMPORTANT:
Although the HP StorageWorks 4/8 SAN Switch uses the same hardware as the 4/16 SAN Switch,
it does not support Access Gateway. Also, Access Gateway mode is not supported with the Brocade
4-Gb SAN Switch for HP p-Class BladeSystem (Brocade 4012) if any half-height BladeServers (BL3xp)
are configured in the same sleeve in the p-Class enclosure. For the latest updates, see the HP website:
http://www.hp.com
Access Gateway connectivity is supported by the switches listed in
by the following B-Series switches:
•
HP StorageWorks EVA4400 embedded switch module
•
HP StorageWorks 8/40 SAN Switch
•
HP StorageWorks 8/80 SAN Switch
•
HP StorageWorks DC SAN Backbone Director
•
HP StorageWorks 4/256 SAN Director
•
HP StorageWorks SAN Switch 4/32
•
HP StorageWorks SAN Switch 4/32B
•
HP StorageWorks SAN Switch 4/64
•
HP StorageWorks 400 Multi-Protocol Router
Access Gateway was introduced with Fabric OS 5.2.1b. It allows a switch to operate in agmode ,
which allows simplified connectivity between large numbers of servers and the SAN. Access Gateway
leverages N_Port ID Virtualization (NPIV) to hide the complexity of the servers (both physical and
virtual) attached to it, while allowing easy SAN connectivity. The edge fabric switch provides all fabric
services, while Access Gateway connects to the edge switch by what appears as a host bus adapter
(HBA) connection. This architecture allows the deployment of many additional servers without requiring
a domain and the associated fabric rebuild traffic. Rebuild traffic is prevalent when switches are
powered on, added, or removed from a fabric.
See the Brocade Access Gateway Administrator's Guide, available on
for more information.
Access Gateway support in non-Brocade fabrics
In addition to being supported in Brocade fabrics, Access Gateway is supported for connectivity to
the following:
•
McDATA fabrics running EOS 09.00.xx with Brocade Fabric OS 5.2.1b
•
McDATA fabrics running EOS 09.02.xx or 09.03.xx with Brocade Fabric OS 5.3.0, 5.3.0a,
5.3.0b, 5.3.0c, 5.3.0d
•
McDATA fabrics running EOS 09.06.x with Brocade Fabric OS 5.3.1, 5.3.1a, 6.0.0b, 6.0.1a
•
Cisco fabrics running SAN-OS 3.0(2a) with Brocade Fabric OS 5.2.1b
•
Cisco fabrics running SAN-OS versions 3.1(2a), 3.1(3), 3.1(3a) with Brocade Fabric OS 5.3.0,
5.3.0a, 5.3.0b, 5.3.0c, 5.3.0d
•
Cisco fabrics running SAN-OS versions 3.0(2a) with Brocade Fabric OS 5.3.1, 5.3.1a, 6.0.0b,
6.0.1a
Access Gateway support
HP StorageWorks Fabric OS 6.1.1b release notes
and also
http://www.hp.com/go/san
7