HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM Installationshandbuch - Seite 11
Blättern Sie online oder laden Sie pdf Installationshandbuch für Schalter HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM herunter. HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM 14 Seiten. 1u rackmount tape enclosure
Auch für HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM: Einbauanleitung (2 seiten), Installationsanleitung Handbuch (20 seiten), Freigabemitteilung (14 seiten), Einbauanleitung (2 seiten), Referenzhandbuch (46 seiten)
Seite drucken
Note:
inner rails. Each switch requires a different number of these screws. For example,
Figure 7
screws. Attaching both inner rails requires ten screws.
Figure 7: Assembling the inner rails
HP StorageWorks SAN Switch 2/8|16|32 Installation Guide
Installing the Switch in a Rack Using the SAN Switch Universal Rack Mount Kit
a. Assemble the two inner rails (one on each side) to the switch using the
appropriate number (from
screws as shown in
The rail kit provides fourteen #8-32 x 3/16-inch screws for assembling the
shows the an inner rail being attached to the SAN Switch 2/16 with five
step
5) of #8-32 x 3/16-inch Phillips pan-head
Figure
7.
9
Addendum Pg