HP StorageWorks XP10000 - Disk Array Handbuch zur Systemkonfiguration - Seite 11

Blättern Sie online oder laden Sie pdf Handbuch zur Systemkonfiguration für Schalter HP StorageWorks XP10000 - Disk Array herunter. HP StorageWorks XP10000 - Disk Array 43 Seiten. Cache lun xp
Auch für HP StorageWorks XP10000 - Disk Array: Freigabemitteilung (13 seiten), Handbuch für Administratoren (50 seiten), Konfigurationshandbuch (42 seiten), Konfigurationshandbuch (40 seiten), Konfigurationshandbuch (40 seiten), Konfigurationshandbuch (36 seiten), Konfigurationshandbuch (36 seiten), Konfigurationshandbuch (30 seiten), Konfigurationshandbuch (36 seiten), Freigabemitteilung (5 seiten), Handbuch zur Systemkonfiguration (49 seiten), Handbuch zur Systemkonfiguration (42 seiten), Handbuch zur Systemkonfiguration (35 seiten), Konfigurationshandbuch (46 seiten), Konfigurationshandbuch (46 seiten), Konfigurationshandbuch (40 seiten), Konfigurationshandbuch (44 seiten), Konfigurationshandbuch (38 seiten), Konfigurationshandbuch (34 seiten), Konfigurationshandbuch (30 seiten), Konfigurationshandbuch (30 seiten), Konfigurationshandbuch (42 seiten), Benutzerhandbuch (30 seiten)

•

LUSE (expanded) CVS devices (OPEN-x*n CVS): LUSE CVS combines CVS devices

to create an expanded device. This is done by ﬁrst creating CVS custom-sized

devices and then using LUSE to combine from 2 to 36 CVS devices. For example,

if three OPEN-9 CVS volumes are combined to create an expanded device, this

device is designated as OPEN-9*3-CVS.

Partitions

In a Linux environment, one LUN can be divided into a maximum of four primary

partitions (using fdisk) or maximum of one extended partition.

The XP family of disk arrays supports many standard software products that provide host,

application, or I/O path failover and management.

SNMP conﬁguration

The XP family of disk arrays supports standard Simple Network Management Protocol

(SNMP) for remotely managing the disk array. The SNMP agent on the service processor

(SVP) performs error-reporting operations requested by the SNMP manager. SNMP

properties are usually set from the SVP but they can also be set remotely using Remote

Web Console XP, Command View XP, or Command View XP Advanced Edition. Refer to

the applicable user's guide for procedures.

RAID Manager manages Business Copy (BC) or Continuous Access (CA) operations

from a host server. To use RAID Manager with BC or CA, you use Remote Web Console,

Command View, or Command View XP Advanced Edition to designate at least one LDEV

as a command device. Refer to the applicable user's guide for information about how to

designate a command device.

Disk Array XP operating system conﬁguration guide: Linux