HP StorageWorks XP10000 - Disk Array Handbuch zur Systemkonfiguration - Seite 25

Blättern Sie online oder laden Sie pdf Handbuch zur Systemkonfiguration für Schalter HP StorageWorks XP10000 - Disk Array herunter. HP StorageWorks XP10000 - Disk Array 42 Seiten. Cache lun xp
Auch für HP StorageWorks XP10000 - Disk Array: Freigabemitteilung (13 seiten), Handbuch für Administratoren (50 seiten), Konfigurationshandbuch (42 seiten), Konfigurationshandbuch (40 seiten), Konfigurationshandbuch (40 seiten), Konfigurationshandbuch (36 seiten), Konfigurationshandbuch (36 seiten), Konfigurationshandbuch (30 seiten), Konfigurationshandbuch (36 seiten), Freigabemitteilung (5 seiten), Handbuch zur Systemkonfiguration (49 seiten), Handbuch zur Systemkonfiguration (43 seiten), Handbuch zur Systemkonfiguration (35 seiten), Konfigurationshandbuch (46 seiten), Konfigurationshandbuch (46 seiten), Konfigurationshandbuch (40 seiten), Konfigurationshandbuch (44 seiten), Konfigurationshandbuch (38 seiten), Konfigurationshandbuch (34 seiten), Konfigurationshandbuch (30 seiten), Konfigurationshandbuch (30 seiten), Konfigurationshandbuch (42 seiten), Benutzerhandbuch (30 seiten)

Seite drucken
HP StorageWorks XP10000 - Disk Array Handbuch zur Systemkonfiguration

Creating and formatting disk partitions

Dynamic Disk is supported with no restrictions for a disk array connected to a Windows
2000/ 2003 system. Refer to Microsoft's online help for details.
CAUTION:
Do not partition or create a file system on a device that will be used as a raw device
(for example, some database applications use raw devices.)
1.
In the Disk Management main window, select the unallocated area for the SCSI disk
you want to partition.
2.
Click the Action menu, and click Create Partition to launch the New Partition
Wizard. Follow the Partition Wizard to create and format partitions and assign
drive letters. Format partitions with the following settings and format options.
File System: NTFS (enables Windows to write to the disk).
Allocation unit size: "Default." Do not change this entry.
Volume label: Enter a volume label, or leave this field blank for no label.
Format Options: Click Perform a Quick Format to decrease the time required to
format the partition. Click Enable file and folder compression only if you want
to enable compression.
3.
Verify the Disk Management main window displays the correct file system (NTFS)
for the formatted partition. The word "Healthy" indicates that the partition has
been created and formatted successfully.
4.
Repeat this procedure for each new disk device.
5.
Exit Disk Management, clicking Yes to save your changes.
Verifying file system operations
1.
Open My Computer and check that the new disks are present.
2.
Right-click on each disk to view Properties and verify the properties are correct
(label, type, capacity, and file system).
3.
Copy a file from an existing drive to each new drive to verify the new drives are
working, and then delete the copies.
Disk Array XP operating system configuration guide: Windows 2000/2003
25