HP StorageWorks XP12000 Handbuch zur Systemkonfiguration - Seite 22

Blättern Sie online oder laden Sie pdf Handbuch zur Systemkonfiguration für Schalter HP StorageWorks XP12000 herunter. HP StorageWorks XP12000 49 Seiten. Cache lun xp
Auch für HP StorageWorks XP12000: Freigabemitteilung (13 seiten), Handbuch für Administratoren (50 seiten), Konfigurationshandbuch (42 seiten), Konfigurationshandbuch (40 seiten), Konfigurationshandbuch (40 seiten), Konfigurationshandbuch (36 seiten), Konfigurationshandbuch (36 seiten), Konfigurationshandbuch (30 seiten), Konfigurationshandbuch (36 seiten), Freigabemitteilung (5 seiten), Handbuch zur Systemkonfiguration (43 seiten), Handbuch zur Systemkonfiguration (42 seiten), Handbuch zur Systemkonfiguration (35 seiten), Konfigurationshandbuch (46 seiten), Konfigurationshandbuch (46 seiten), Konfigurationshandbuch (40 seiten), Konfigurationshandbuch (44 seiten), Konfigurationshandbuch (38 seiten), Konfigurationshandbuch (34 seiten), Konfigurationshandbuch (30 seiten), Konfigurationshandbuch (30 seiten), Konfigurationshandbuch (42 seiten), Konfigurationshandbuch (50 seiten), Benutzerhandbuch (30 seiten)

Seite drucken
HP StorageWorks XP12000 Handbuch zur Systemkonfiguration
6.
On the Disk Partition Options screen, select Create NetWare disk partition, and
press ENTER.
7.
You are now prompted to create the partition either automatically or manually. Click
the desired option, and press ENTER.
If you select automatic partitioning, NetWare will create the disk partition and hot
fix area using the available disk space (the hot fix area will be approximately two
percent of the partition size). If you select manual partitioning, enter a partition
size and hot fix area.
8.
On the Disk Partition Information screen, verify (or enter) the partition size and hot
fix data area size, and press F10 to save the changes. You are returned to the
Disk Partition Options screen.
9.
Click Create NetWare disk partition again, and press ENTER.
10.
When the "Create NetWare Partition?" message appears, click Yes and press
ENTER to create the specified disk partition on the selected device.
11.
Press Esc until you are returned to the Available Disk Drives screen. Repeat steps 4
through 10 to create the disk partition on each new OPEN-x and LUSE device.
12.
When you are finished creating disk partitions, return to the Installation Option
screen. From the Available Disk Drives screen, press Esc to return to Available Disk
Options, and then click Return to previous menu and press ENTER.
NetWare 6.0
1.
Start ConsoleOne on the Windows server.
2.
Select the targeted server, right click, and click Properties.
3.
Click the Media tab, click Devices, and click New.
4.
Select a device where you want to create a partition.
5.
Select "NSS" as the partition type.
6.
Enter the size of the partition in bytes (B), kilobytes (KB), megabytes (MB), or
gigabytes (GB) and click OK.
7.
To reserve space for the Hot Fix error correction feature, select Hot Fix and enter the
amount of space or percentage you want to reserve.
Mirrored partitions must be compatible in data area size. This means the new
partition must be at least the same size or slightly larger than the other partitions in
the group. The physical size (combined data and Hot Fix size) of the partition must
be at least 100 KB larger, but no more than 120 MB larger than the data size of
the existing partitions in the mirror group.
8.
To mirror the partition, select Mirror and select one of the following options:
22
Installation