HP XP20000/XP24000 Konfigurationshandbuch - Seite 32

Blättern Sie online oder laden Sie pdf Konfigurationshandbuch für Schalter HP XP20000/XP24000 herunter. HP XP20000/XP24000 46 Seiten. Hp storageworks xp disk array configuration guide: vmware (a5951-96106, september 2010)
Auch für HP XP20000/XP24000: Freigabemitteilung (13 seiten), Integrationshandbuch (29 seiten), Freigabemitteilung (4 seiten), Handbuch für Administratoren (50 seiten), Konfigurationshandbuch (42 seiten), Konfigurationshandbuch (40 seiten), Konfigurationshandbuch (40 seiten), Konfigurationshandbuch (36 seiten), Konfigurationshandbuch (36 seiten), Konfigurationshandbuch (30 seiten), Konfigurationshandbuch (36 seiten), Freigabemitteilung (5 seiten), Konfigurationshandbuch (46 seiten), Referenzhandbuch (46 seiten), Konfigurationshandbuch (40 seiten), Konfigurationshandbuch (44 seiten), Konfigurationshandbuch (38 seiten), Konfigurationshandbuch (34 seiten), Konfigurationshandbuch (30 seiten), Konfigurationshandbuch (30 seiten)

Seite drucken
HP XP20000/XP24000 Konfigurationshandbuch
Error Condition
The disk array performs a self reboot
because the disk array was busy or
it logged a panic message.
The disk array responds "Not Ready"
or the disk array has displayed "Not
Ready" and timed out.
The host detects a parity error.
The host hangs or devices are
declared and the host hangs.

Calling the HP support center

If you are unable to resolve an error condition, contact the HP support center for assistance.

Contact information

Telephone numbers for worldwide technical support are listed on the HP support web site:
http://www.hp.com/support/.

Before you call

Be sure to have the following information available:
•
Technical support registration number (if applicable)
•
Product serial numbers
•
Product model names and numbers
•
Applicable error messages
•
Operating system type and revision level
•
Detailed, specific questions
For continuous quality improvement, calls may be recorded or monitored.
32
Troubleshooting
Recommended Action
Reboot the host.
Contact HP.
Check the FCA and make sure it was installed properly.
Reboot the host.
Make sure there are no duplicate disk array TIDs and that disk array
TIDs do not conflict with any host TIDs.
Verify server hardware configuration. Ethernet card may need to be
in slot 9 for NetWare to function with the HP Netserver. Avoid shared
interrupts; if unavoidable, use sharing among similar card types. Check
for the latest device drivers and try simplifying the configuration.