HP XP20000/XP24000 Konfigurationshandbuch - Seite 17

Blättern Sie online oder laden Sie pdf Konfigurationshandbuch für Schalter HP XP20000/XP24000 herunter. HP XP20000/XP24000 34 Seiten. Hp storageworks xp disk array configuration guide: vmware (a5951-96106, september 2010)
Auch für HP XP20000/XP24000: Freigabemitteilung (13 seiten), Integrationshandbuch (29 seiten), Freigabemitteilung (4 seiten), Handbuch für Administratoren (50 seiten), Konfigurationshandbuch (42 seiten), Konfigurationshandbuch (40 seiten), Konfigurationshandbuch (40 seiten), Konfigurationshandbuch (36 seiten), Konfigurationshandbuch (36 seiten), Konfigurationshandbuch (30 seiten), Konfigurationshandbuch (36 seiten), Freigabemitteilung (5 seiten), Konfigurationshandbuch (46 seiten), Konfigurationshandbuch (46 seiten), Referenzhandbuch (46 seiten), Konfigurationshandbuch (40 seiten), Konfigurationshandbuch (44 seiten), Konfigurationshandbuch (38 seiten), Konfigurationshandbuch (30 seiten), Konfigurationshandbuch (30 seiten)

Creating and formatting disk partitions

Dynamic Disk is supported with no restrictions for a disk array connected to a Windows

2000/2003/2008 system. For more information, see Microsoft's online help.

CAUTION:

Do not partition or create a file system on a device that will be used as a raw device (for example,

some database applications use raw devices.)

In the Disk Management main window, select the unallocated area for the SCSI disk you want

to partition.

Click the Action menu, and then click Create Partition to launch the New Partition Wizard. Follow

the Partition Wizard to create and format partitions and assign drive letters. Format partitions

with the following settings and format options.

File System: NTFS (enables Windows to write to the disk).

Allocation unit size: Default. Do not change this entry.

Volume label: Enter a volume label, or leave this field blank for no label.

Format Options: Click Perform a Quick Format to decrease the time required to format the partition.

Click Enable file and folder compression only if you want to enable compression.

Verify the Disk Management main window displays the correct file system (NTFS) for the formatted

partition. "Healthy" indicates the partition has been created and formatted successfully.

Repeat this procedure for each new disk device.

Exit Disk Management, clicking Yes to save your changes.

Open My Computer and check that the new disks are present.

Right-click each disk to view Properties and verify the properties are correct (label, type, capacity,

and file system).

Copy a file from an existing drive to each new drive to verify the new drives are working, and

then delete the copies.

XP Disk Array Configuration Guide: Windows