Aquatel D110 Gebrauchsanweisung - Seite 6

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Monitor Aquatel D110 herunter. Aquatel D110 13 Seiten. Wireless level monitor
Auch für Aquatel D110: Gebrauchsanweisung (12 seiten)

Seite drucken

Set Depth. For the D110 to determine the correct fluid levels, the depth of the

tank/cistern from

Menu", to access this menu see

Setting the Air Gap. Go to the

"Tank Unit Setup Menu" (refer to

once you enter this menu scroll

through to the "Air Gap" and

then using the arrow up and arrow

down buttons, select the required

air gap.

*Air gap: Distance between where

tank unit is installed and the maximum

fluid level)

100mm (min) – 1000mm (max)

3.93" (min) – 39.37" (max)

Ensuring Maximum Range

The D110 uses short range radio communications and works better with less

obstructions between Aquatel units. The more obstructions there are, the lower

the transmission range you will be able to achieve. For example, locating the

Display Unit by a window will give stronger communication signals than if it is

behind a concrete or metal wall. If you need to increase your radio signal strength

there are two antenna upgarde options available for purchase, the AQ930

Omni Booster Antenna giving up to 600m/2000' range LOS (line of sight) and the

AQ920-7 Yagi (Directional) Booster Antenna to give maximum working range

of up to 10km / 6 miles line of sight when used both ends. It is important to

follow all instructions and take good care when mounting antennas, this will

help to reduce risk of personal injury and provide the best working performance

of your new Aquatel Wireless Fluid Level Monitoring system. Detailed Antenna

mounting instructions can be downloaded from our webiste www.aquatel.co.nz.

must be input on the Display Unit via the "Tank unit Setup

) ,

– 5 –

Air Gap*